Tire Pressure Warning Receiver (For Sedan) Removal

Suspension. Yaris. Ncp93, 131
Tire Pressure Monitoring. Yaris. Ncp93, 131

  1. REMOVE REAR SEAT CUSHION COVER PAD SUB-ASSEMBLY

  2. REMOVE REAR SEATBACK ASSEMBLY RH (for 60/40 Split Seat Type)

  3. REMOVE REAR SEATBACK ASSEMBLY LH (for 60/40 Split Seat Type)

  4. REMOVE REAR SEATBACK ASSEMBLY (for Fixed Seat Type)

  5. REMOVE REAR DOOR SCUFF PLATE RH

  6. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH

  7. REMOVE REAR SEAT SIDE COVER RH

  8. REMOVE ROOF SIDE INNER GARNISH RH

  9. REMOVE TIRE PRESSURE WARNING RECEIVER ASSEMBLY (w/ Antenna)

Tire Pressure Warning Receiver (For Sedan) -- Removal



1. REMOVE REAR SEAT CUSHION COVER PAD SUB-ASSEMBLY


    Yaris. Ncp93, 131

  1. Hold the front edge of the rear seat cushion cover pad and lift it up, as shown in the illustration, to disengage the 2 hooks.

    NOTICE:
    Hold the area around the hooks so as to avoid deforming the rear seat cushion frame.

  1. Pass the rear seat inner belt through the slit in the rear seat cushion cover pad, disengage the hook between the rear seat cushion cover pad and the rear seatback, and remove the rear seat cushion cover pad.



2. REMOVE REAR SEATBACK ASSEMBLY RH (for 60/40 Split Seat Type)


    Yaris. Ncp93, 131

  1. Remove the rear seat outer belt from the rear seat shoulder belt guide.

  1. Remove the rear center seat outer belt from the rear center seat shoulder belt guide.

  1. Pull the rear seatback lock release button and tilt the rear seatback forward.



    Yaris. Ncp93, 131

  1. Using a clip remover, remove the 2 clips and the rear seatback cover.



    Yaris. Ncp93, 131

  1. Remove the 2 bolts, the 2 hooks and the rear seatback.



3. REMOVE REAR SEATBACK ASSEMBLY LH (for 60/40 Split Seat Type)


    Yaris. Ncp93, 131

  1. Remove the rear seat outer belt from the rear seat shoulder belt guide.

  1. Pull the rear seatback lock release button and tilt the rear seatback forward.



    Yaris. Ncp93, 131

  1. Using a clip remover, remove the 2 clips and the rear seatback cover.



    Yaris. Ncp93, 131

  1. Remove the 2 bolts, the 2 hooks and the rear seatback.



4. REMOVE REAR SEATBACK ASSEMBLY (for Fixed Seat Type)


Yaris. Ncp93, 131.Tire Pressure Monitoring.Tire Pressure Warning System (For Sedan).Tire Pressure Warning Receiver (For Sedan) Removal

  1. Remove the rear seat outer belt from the rear seat shoulder belt guide.

    HINT:
    Use the same procedure for both sides.

  1. Remove the rear center seat outer belt from the rear center seat shoulder belt guide.



    Yaris. Ncp93, 131

  1. Remove the 3 bolts.

  1. Disengage the 3 hooks and remove the rear seatback.



5. REMOVE REAR DOOR SCUFF PLATE RH


    Yaris. Ncp93, 131

  1. Disengage the 7 claws and remove the rear door scuff plate.



6. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH


    Yaris. Ncp93, 131

  1. Remove the rear door opening trim weatherstrip.



7. REMOVE REAR SEAT SIDE COVER RH


    Yaris. Ncp93, 131

  1. Disengage the 2 clips and the 4 claws and remove the rear seat side cover.



8. REMOVE ROOF SIDE INNER GARNISH RH


    Yaris. Ncp93, 131.Tire Pressure Monitoring.Tire Pressure Warning System (For Sedan).Tire Pressure Warning Receiver (For Sedan) Removal

  1. w/ Curtain Shield Airbag:

    NOTICE:
    Replace the special clip with a new one when the roof side inner garnish is removed.

    1. Disengage the 4 clips and the claw and remove the roof side inner garnish.



    Yaris. Ncp93, 131

  1. w/o Curtain Shield Airbag:

    1. Disengage the 4 clips and the claw and remove the roof side inner garnish.



9. REMOVE TIRE PRESSURE WARNING RECEIVER ASSEMBLY (w/ Antenna)


Yaris. Ncp93, 131

  1. Disconnect the tire pressure warning receiver connector.

  1. Remove the bolt.

  1. Disengage the clip and remove the tire pressure warning receiver.