Back-Up Light Switch (For Hatchback) -- Installation |
| 1. INSTALL BACK UP LIGHT SWITCH ASSEMBLY |
Using SST, install the back up light switch assembly to manual transaxle with new gasket.
- SST
- 09817-16011
- Torque:
- 40 N*m{410 kgf*cm, 30 ft.*lbf}
Connect the back up light switch connector.
Install the 2 clamps and wire harness.
| 2. CONNECT TRANSMISSION CONTROL CABLE ASSEMBLY |
 |
Install the control shift cable of transmission control cable assembly to the shift cable bracket with new clip B.
Install the control shift cable of transmission control cable assembly to the manual transaxle assembly with washer and clip A.
| 3. INSTALL AIR CLEANER CAP W/ AIR CLEANER HOSE |
Install the air cleaner case onto the air cleaner bracket with the 2 bolts.
- Torque:
- 7.8 N*m{80 kgf*cm, 69 in.*lbf}
Engage the clamp and connect the wire harness to the air cleaner case.
Install the air cleaner element onto the air cleaner case.
Install the air cleaner cap sub-assembly with No. 1 air cleaner hose onto the throttle body assembly
Engage the 2 clamps and connect the air cleaner cap sub-assembly to the air cleaner case sub-assembly.
Tighten the hose clamp.
- Torque:
- 3.0 N*m{31 kgf*cm, 27 in.*lbf}
Connect the vacuum switching valve assembly connector.
Connect the mass air flow meter connector.
Engage the 2 clamps and connect the wire harness to the air cleaner cap sub-assembly and vacuum switching valve assembly.
Connect the No. 2 fuel vapor feed hose to the intake manifold.
Connect the fuel vapor feed hose assembly to the No. 1 air cleaner hose and vacuum switching valve assembly with the 2 hose clamps.
Engage the clamp and connect the fuel vapor feed hose assembly to the No. 1 air cleaner hose.