Fuel Sender Gauge Assembly (For Sedan) Inspection

Check the fuel sender gauge resistance (Fuel sender gauge Type A).

1. Check that the float moves smoothly between the F level (upper end) and E level (lower end).
   

2. Using an ohmmeter, measure the resistance between connector terminals 2 (FS) and 1 (FE) at the upper and lower ends of the float. Check that the resistance varies uniformly.
   

   Standard resistance:

   Float Level	Resistance (Ω)
   F (Upper End)	12.0 to 18.0
   E (Lower End)	405.0 to 415.0

   If the result is not as specified, replace the fuel sender gauge assembly.
   

Check the fuel sender gauge resistance (Fuel sender gauge Type B).

1. Check that the float moves smoothly between the F level (upper end) and E level (lower end).
   

2. Using an ohmmeter, measure the resistance between connector terminals 2 (FS) and 1 (FE) at the upper and lower ends of the float. Check that the resistance varies uniformly.
   

   Standard resistance:

   Float Level	Resistance (Ω)
   F (Upper End)	13.5 to 16.5
   E (Lower End)	405.5 to 414.5

   If the result is not as specified, replace the fuel sender gauge assembly.