Cylinder Block (For Sedan) Disassembly

Using a ridge reamer, remove all the carbon from the top of the cylinder.

Using SST, remove the connecting rod cap bolt and cap.

SST

09205-16011

Push the piston, connecting rod assembly and upper bearing through the top of the cylinder block to remove them.

HINT:

1. Keep the bearing, connecting rod and cap together.
   
2. Keep the piston and the connecting rod assemblies in the correct order so that they can be returned to their original locations when reassembled.
   

Using several steps, loosen and remove the 10 bearing cap sub-assembly bolts uniformly using SST in the sequence shown in the illustration.

SST

09011-38121

Remove the bearing cap and the crankshaft.

Using a piston ring expander, remove the 2 compression rings.

Remove the 2 side rails and the oil ring by hand.

Using SST, press the piston pin out of the piston.

SST

09221-25026(09221-00021,09221-00030,09221-00150,09221-00090,09221-00100)

NOTICE:

Keep the pistons, pins, rings, connecting rods and bearings in the correct order so that they can be returned to their original locations when reassembled.