Heated Oxygen Sensor (For Sedan) -- Removal |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER CENTER |
 |
Disengage the 2 claws and 2 clips and remove the instrument panel finish panel lower center.
| 3. REMOVE INSTRUMENT PANEL FINISH PANEL END LH |
 |
Disengage the 6 claws and 3 clips and remove the instrument panel finish panel end LH.
| 4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) |
| 5. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY |
 |
Shift the shift lever into the N position.
Disengage the 5 clips and the claw and remove the upper console panel.
| 6. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY |
 |
Disengage the 3 clips and 3 claws.
Disconnect the connector and remove the rear upper console panel.
| 7. REMOVE CONSOLE BOX CARPET |
Remove the console box carpet.
 |
| 8. REMOVE REAR CONSOLE BOX ASSEMBLY |
Disconnect the clamp.
 |
Remove the 2 bolts and 2 screws.
Disengage the 4 claws and remove the rear console box.
| 9. REMOVE INSTRUMENT PAD LOWER LH |
 |
Remove screw <I>.
Disengage the claw and 3 clips and remove the instrument panel pad lower.
| 10. REMOVE HEATED OXYGEN SENSOR |
Disconnect the sensor connector.
Remove the grommet and pass the sensor connector out of the cabin through the floor panel.
Using SST, remove heated oxygen sensor.
- SST
- 09224-00010
 |