Crankshaft Position Sensor (For Hatchback) Installation

Engine Hybrid System. Yaris. Ncp93, 131
1Nz-Fe Engine Control. Yaris. Ncp93, 131

  1. INSTALL CRANKSHAFT POSITION SENSOR

  2. INSPECT FOR ENGINE OIL LEAK

  3. INSTALL ENGINE UNDER COVER RH

Crankshaft Position Sensor (For Hatchback) -- Installation



1. INSTALL CRANKSHAFT POSITION SENSOR

  1. Apply a light coat of engine oil to the O-ring.

    NOTICE:
    If reusing the camshaft position sensor, be sure to inspect the O-ring.

  1. Install the crankshaft position sensor with the bolt.

    Torque:
    7.5 N*m{76 kgf*cm, 66 in.*lbf}
    NOTICE:
    1. If a component has been dropped or subjected to a strong impact, replace it.
    2. Make sure that the O-ring is not damaged or does not jump out of position during installation.

  1. Connect the crankshaft position sensor connector.



2. INSPECT FOR ENGINE OIL LEAK


3. INSTALL ENGINE UNDER COVER RH