Vehicle Exterior. Corolla. Zre142 Aze141
Wiper Washer. Corolla. Zre142 Aze141
Wiper Switch -- Removal |
1. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD |
2. REMOVE STEERING WHEEL ASSEMBLY |
3. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY |
Remove the 2 screws <B>.
![]() |
Disengage the 5 claws, 2 guides and 2 clips, and then remove the lower instrument panel finish panel sub-assembly.
![]() |
4. REMOVE LOWER STEERING COLUMN COVER |
- NOTICE:
- Removing the lower steering column cover in the incorrect order will cause the lower steering column cover to break.
Push the right and left sides of the lower steering column cover, and disengage the 4 claws.
![]() |
Insert your fingers into the opening of the tilt lever of the lower steering column cover to disengage the claw.
- HINT:
- Spread the claw to disengage it.
![]() |
Using a screwdriver, insert the tip into each service hole to disengage the 2 claws and remove the lower steering column cover as shown in the illustration.
5. REMOVE UPPER STEERING COLUMN COVER |
Disengage the claw and the 2 pins, and remove the upper steering column cover.
![]() |
6. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY |
Disconnect the 2 connectors.
![]() |
Disengage the claw and remove the windshield wiper switch assembly as shown in the illustration.
- NOTICE:
- If the claw is pushed with excessive force, it may break.