Front Seat Cushion Heater Removal

Lift up the seat track adjusting handle and move the seat to the foremost position.

Disengage the 2 claws and remove the outer seat track cover.

Disengage the 2 claws and remove the inner seat track cover.

Remove the 2 bolts on the rear side of the seat.

Lift up the seat track adjusting handle and move the seat to the rearmost position.

Remove the 2 bolts on the front side of the seat.

Lift up the seat track adjusting handle and move the seat to the center position. Also, operate the reclining adjuster release handle and move the seatback to the upright position.

Disconnect the connectors under the front seat assembly.

Remove the front seat assembly.

NOTICE:

Be careful not to damage the vehicle body.

Using a screwdriver wrapped with protective tape, disengage the claw and remove the reclining adjuster release handle.

Using a screwdriver wrapped with protective tape, disengage the 2 claws and remove the vertical seat adjuster knob cap.

Remove the 2 screws and the vertical adjusting handle.

Remove the 3 screws.

Disengage the claw.

Disengage the 2 guides and remove the front seat cushion shield.

Disconnect each connector and clamp.

Remove the nut and the front seat inner belt assembly.

Remove the screw.

Disengage the claw.

Separate the guide and remove the front seat cushion inner shield as shown in the illustration.

Disengage the hook.

Remove the 2 hog rings.

Using a clip remover, remove the 2 clips.

Disengage the hooks and remove the front seat cushion cover with pad as shown in the illustration.

Remove the 10 hog rings and the separate type front seat cushion cover.

Cut off the 8 tack pins and remove the front seat cushion heater assembly.