Transponder Key Amplifier Removal
REMOVE STEERING WHEEL ASSEMBLY
REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY
REMOVE LOWER STEERING COLUMN COVER
REMOVE UPPER STEERING COLUMN COVER
REMOVE TRANSPONDER KEY AMPLIFIER
Transponder Key Amplifier -- Removal |
1. REMOVE STEERING WHEEL ASSEMBLY |
(COROLLA_ZRE142 RM0000029SZ02TX.html)
2. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY |
Remove the 2 screws <B>.
Disengage the 5 claws, 2 guides and 2 clips, and then remove the lower instrument panel finish panel sub-assembly.
3. REMOVE LOWER STEERING COLUMN COVER |
- NOTICE:
- Removing the lower steering column cover in the incorrect order will cause the lower steering column cover to break.
Push the right and left sides of the lower steering column cover, and disengage the 4 claws.
Insert your fingers into the opening of the tilt lever of the lower steering column cover to disengage the claw.
- HINT:
- Spread the claw to disengage it.
Using a screwdriver, insert the tip into each service hole to disengage the 2 claws and remove the lower steering column cover as shown in the illustration.
4. REMOVE UPPER STEERING COLUMN COVER |
Disengage the claw and the 2 pins, and remove the upper steering column cover.
5. REMOVE TRANSPONDER KEY AMPLIFIER |
Disengage the 2 claws as shown in the illustration.
Disconnect the connector and remove the transponder key amplifier.