Navigation System Data Signal Circuit Between Stereo Jack Adapter And Extension Module
DESCRIPTION
WIRING DIAGRAM
INSPECTION PROCEDURE
CHECK HARNESS AND CONNECTOR (EXTENSION MODULE - NO. 1 STEREO JACK ADAPTER ASSEMBLY)
NAVIGATION SYSTEM - Data Signal Circuit between Stereo Jack Adapter and Extension Module |
DESCRIPTION
The No. 1 stereo jack adapter assembly sends the sound data signal or image data signal from a USB device to the extension module via this circuit.
WIRING DIAGRAM
INSPECTION PROCEDURE
| 1.CHECK HARNESS AND CONNECTOR (EXTENSION MODULE - NO. 1 STEREO JACK ADAPTER ASSEMBLY) |
Disconnect the extension module connector.
Disconnect the No. 1 stereo jack adapter assembly connector.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
| Condition
| Specified Condition
|
E120-2 (UDO-) - E131-2 (UDO-)
| Always
| Below 1 Ω
|
E120-3 (UDO+) - E131-3 (UDO+)
| Always
| Below 1 Ω
|
E120-5 (UJSS) - E131-5 (USG1)
| Always
| Below 1 Ω
|
E120-2 (UDO-) - Body ground
| Always
| 10 kΩ or higher
|
E120-3 (UDO+) - Body ground
| Always
| 10 kΩ or higher
|
E120-5 (UJSS) - Body ground
| Always
| 10 kΩ or higher
|
Text in Illustration*a
| Front view of wire harness connector
(to Extension Module)
|
*b
| Front view of wire harness connector
(to No. 1 Stereo Jack Adapter Assembly)
|
| | REPAIR OR REPLACE HARNESS OR CONNECTOR |
|
|
