Front Door Speaker Installation

Engage the 3 claws and install the front No. 2 speaker assembly.

Connect the connector.

Engage the clip and clamp, and install the front door lower frame bracket garnish.

Using an air riveter or hand riveter, install the front No. 1 speaker assembly with 3 new rivets.

NOTICE:

1. Do not pry the rivet with the riveter, as this will cause damage to the riveter and mandrel.
   
2. Confirm that the rivet is seated properly against the moulding. Do not tilt the riveter when installing the rivet to the moulding. Do not leave any space between the rivets head and moulding.
   
3. Do not leave any space between the moulding and door frame. Firmly hold the 2 items together while installing the rivet.
   

HINT:

If the rivet cannot be cut, pull it once and cut it.

Connect the connector.

Engage the front door trim board with the 5 claws on the front door inner glass weatherstrip.

Engage the 10 clips and install the front door trim board to the front door panel.

Install the 2 screws.

Engage the claw to install the door armrest cap.

Engage the 2 clips and 6 claws, and install the front armrest upper base panel.

w/ Power Door Lock:

1. Connect the connector.
   

Connect the connector.

Engage the 2 clips and 6 claws, and install the front armrest upper base panel.

Engage the 3 claws and install the front door inside handle bezel.

Temporarily install the front door window regulator handle assembly and fully close the window glass.

Install the front door regulator inside handle plate.

Install the snap ring to the front door window regulator handle assembly.

Install the front door window regulator handle assembly as shown in the illustration.