Rear Axle Hub Removal

Drivetrain. Corolla. Zre142 Aze141
Axle And Differential. Corolla. Zre142 Aze141

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL LH (for Rear Disc Brake)

  3. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL RH (for Rear Disc Brake)

  4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Rear Disc Brake)

  5. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Rear Disc Brake)

  6. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (for Rear Disc Brake)

  7. LOOSEN PARKING BRAKE CABLE (for Rear Disc Brake)

  8. REMOVE REAR WHEEL

  9. DISCONNECT REAR SPEED SENSOR WIRE (for Rear Drum Brake)

  10. DISCONNECT REAR SPEED SENSOR WIRE (for Rear Disc Brake)

  11. REMOVE PARKING BRAKE LEVER PROTECTOR (for Rear Disc Brake)

  12. SEPARATE NO. 3 PARKING BRAKE CABLE ASSEMBLY (for Rear Disc Brake)

  13. SEPARATE REAR DISC BRAKE CALIPER ASSEMBLY (for Rear Disc Brake)

  14. REMOVE REAR DISC (for Rear Disc Brake)

  15. REMOVE REAR BRAKE DRUM (for Rear Drum Brake)

  16. REMOVE REAR AXLE HUB AND BEARING ASSEMBLY (for Rear Drum Brake)

  17. REMOVE REAR AXLE HUB AND BEARING ASSEMBLY (for Rear Disc Brake)

Rear Axle Hub -- Removal


HINT:
  1. Use the same procedure for the RH side and LH side.
  2. The procedure listed below is for the LH side.


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


2. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL LH (for Rear Disc Brake)


    Corolla. Zre142 Aze141

  1. Disengage the 3 claws and clip, and then remove the lower instrument panel finish panel LH.



3. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL RH (for Rear Disc Brake)


    Corolla. Zre142 Aze141

  1. Disengage the 3 claws and clip, and then remove the lower instrument panel finish panel RH.



4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Rear Disc Brake)
HINT:
  1. for Manual Transaxle (COROLLA_ZRE142 RM000002XV501QX_01_0022.html)
  2. for Automatic Transaxle (COROLLA_ZRE142 RM000002XV501QX_01_0025.html)


5. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Rear Disc Brake)
HINT:
  1. for Manual Transaxle (COROLLA_ZRE142 RM000002XV501QX_01_0017.html)
  2. for Automatic Transaxle (COROLLA_ZRE142 RM000002XV501QX_01_0028.html)


6. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (for Rear Disc Brake)


    Corolla. Zre142 Aze141

  1. Using a moulding remover, disengage the 6 clips and 2 guides, and remove the upper console panel sub-assembly.



7. LOOSEN PARKING BRAKE CABLE (for Rear Disc Brake)


    Corolla. Zre142 Aze141.Axle And Differential.Axle System.Rear Axle Hub Removal

  1. Loosen the lock nut and adjusting nu to completely release the parking brake cable.



8. REMOVE REAR WHEEL


9. DISCONNECT REAR SPEED SENSOR WIRE (for Rear Drum Brake)


    Corolla. Zre142 Aze141.Axle And Differential.Axle System.Rear Axle Hub Removal

  1. Using a screwdriver, disconnect the connector from the rear speed sensor.

    NOTICE:
    Be careful not to damage the rear speed sensor.


10. DISCONNECT REAR SPEED SENSOR WIRE (for Rear Disc Brake)


    Corolla. Zre142 Aze141

  1. Using a screwdriver, disconnect the connector from the rear speed sensor.

    NOTICE:
    Be careful not to damage the rear speed sensor.


11. REMOVE PARKING BRAKE LEVER PROTECTOR (for Rear Disc Brake)


    Corolla. Zre142 Aze141

  1. Remove the parking brake lever protector from the No. 3 parking brake cable assembly.



12. SEPARATE NO. 3 PARKING BRAKE CABLE ASSEMBLY (for Rear Disc Brake)


    Corolla. Zre142 Aze141

  1. Disengage the clamp from the No. 3 parking brake cable assembly.

  1. Remove the bolt.



    Corolla. Zre142 Aze141

  1. Separate the No. 3 parking brake cable assembly from the rear disc brake cylinder assembly.



    Corolla. Zre142 Aze141.Axle And Differential.Axle System.Rear Axle Hub Removal

  1. Remove the No. 3 parking brake cable assembly.

    HINT:
    Insert an offset wrench (14 mm) at the base of the No. 3 parking brake cable assembly as shown in the illustration to disengage the clip. Pull out the No. 3 parking brake cable assembly from the rear disc brake cylinder assembly.


    Corolla. Zre142 Aze141

  1. Separate the No. 3 parking brake cable clamp.



    Corolla. Zre142 Aze141

  1. Remove the bolt and pull out the No. 3 parking brake cable assembly to the outside of the body.



  1. Remove the 2 bolts and the No. 3 parking brake cable assembly.


    Corolla. Zre142 Aze141.Axle And Differential.Axle System.Rear Axle Hub Removal



13. SEPARATE REAR DISC BRAKE CALIPER ASSEMBLY (for Rear Disc Brake)


    Corolla. Zre142 Aze141

  1. Remove the 2 bolts, and separate the rear disc brake caliper assembly.

    NOTICE:
    Use wire or an equivalent tool to keep the brake caliper from hanging down by the flexible hose.


14. REMOVE REAR DISC (for Rear Disc Brake)


    Corolla. Zre142 Aze141.Axle And Differential.Axle System.Rear Axle Hub Removal

  1. Remove the rear disc.

    HINT:
    Place matchmarks on the disc and axle hub.


15. REMOVE REAR BRAKE DRUM (for Rear Drum Brake)


    Corolla. Zre142 Aze141.Axle And Differential.Axle System.Rear Axle Hub Removal

  1. Release the parking brake and remove the rear brake drum.

    HINT:
    If the rear brake drum cannot be removed easily, perform the following procedure.

    1. Remove the shoe adjusting hole plug and insert a screwdriver through the hole into the backing plate, and hold the automatic adjust lever away from the adjuster.

    2. Using another screwdriver, contract the brake shoe by turning the adjusting bolt.



16. REMOVE REAR AXLE HUB AND BEARING ASSEMBLY (for Rear Drum Brake)


    Corolla. Zre142 Aze141

  1. Remove the 4 bolts and the rear axle hub and bearing assembly.



17. REMOVE REAR AXLE HUB AND BEARING ASSEMBLY (for Rear Disc Brake)


    Corolla. Zre142 Aze141

  1. Remove the 4 bolts and the rear axle hub and bearing assembly.