INSPECT FRONT UPPER SUSPENSION ARM

Flip the ball joint stud back and forth 5 times as shown in the illustration before installing the nut.

Use a torque wrench to turn the nut continuously at a rate of 2 to 4 seconds per turn. Take the torque reading on the 5th turn.

• Turning torque:
• 0.98 to 3.43 N*m (10 to 35 kgf*cm, 8.7 to 30.4 in.*lbf)

If the value is not within the specified range, replace the front upper suspension arm with a new one.

Check the dust boots for cracks or grease leakage.