Differential Case Inspection
INSPECT FRONT DIFFERENTIAL PINION THRUST WASHER
INSPECT NO. 1 FRONT DIFFERENTIAL PINION SHAFT
Differential Case -- Inspection |
| 1. INSPECT FRONT DIFFERENTIAL PINION THRUST WASHER |
Using a micrometer, measure the thickness of the front differential pinion thrust washer.
- Minimum thickness:
- 0.9 mm (0.0354 in.)
If the thickness is less than the minimum, replace the front differential pinion thrust washer.
| 2. INSPECT NO. 1 FRONT DIFFERENTIAL PINION SHAFT |
Using a micrometer, measure the outside diameter of the No. 1 front differential pinion shaft.
- Minimum diameter:
- 17.975 mm (0.70768 in.)
If the outer diameter is less than the minimum, replace the No. 1 front differential pinion shaft.
