Rear View Monitor System Precaution

Body Electrical. Camry. Acv40 Gsv40
Park Assist Monitoring. Camry. Acv40 Gsv40

  1. EXPRESSIONS OF IGNITION SWITCH

  1. NOTES FOR REAR TELEVISION CAMERA

Rear View Monitor System -- Precaution



1.EXPRESSIONS OF IGNITION SWITCH

  1. The type of ignition switch used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this section.

    Switch Type
    		Ignition Switch
    (Position)
    		Engine Switch
    (Condition)
    Expression
    		Ignition Switch off
    		LOCK
    		Off
    Ignition Switch ON
    		ON
    		On (IG)
    Ignition Switch ACC
    		ACC
    		On (ACC)
    Engine Start
    		START
    		Start


2.NOTES FOR REAR TELEVISION CAMERA

  1. Notes for the rear television camera assembly

    1. The rear view monitor system may not function properly if subjected to a severe blow by any hard object.

    2. Do not scrub the cover part of the camera (resin made). Scrubbing may scratch the cover and affect the image. Prevent organic solvents, waxes, bond removing solvents or glass coating from adhering to the cover. If such material adheres to the cover, clean it off immediately and wash with water.

    3. Exposing the camera to a sudden temperature change may affect proper functioning of the camera.

    4. A clear image may not appear if the camera is dirty with snow, mud, etc. In that case, wash it with water and wipe off the lens. Use a detergent to remove dirt if necessary.

  2. Images are difficult to discern even in normal conditions if:

    1. The camera screen is frosted over (the image immediately after turning the ignition switch to ON may be blurred or darker than normal).

    2. The camera lens is dirty with snow, mud, etc.

    3. A strong beam of light, such as a sunbeam or headlight, hits the camera.

    4. It is too dark around the camera (at night etc.).

    5. The ambient temperature around the camera is either too high or too low.

    6. The vehicle is tilted at a steep angle.

    7. The ambience of the camera is too bright. (When a strong light, such as a sunbeam reflected off the vehicle body, hits the camera, the image may be blurred. This is called the "SMEAR" phenomenon, peculiar to the CCD camera.)