Multi-Display Removal

Body Electrical. Camry. Acv40 Gsv40
Navigation. Camry. Acv40 Gsv40

  1. PRECAUTION

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle)

  4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)

  5. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH

  6. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH

  7. REMOVE FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY (for Automatic Transaxle)

  8. REMOVE UPPER CONSOLE PANEL (for Manual Transaxle)

  9. REMOVE UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Automatic Transaxle)

  10. REMOVE UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Manual Transaxle)

  11. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY

  12. REMOVE INSTRUMENT PANEL NO. 2 REGISTER ASSEMBLY

  13. REMOVE NAVIGATION RECEIVER WITH HEATER CONTROL PANEL ASSEMBLY

  14. REMOVE RADIO NO. 1 BRACKET

  15. REMOVE RADIO NO. 2 BRACKET

  16. REMOVE NAVIGATION RECEIVER ASSEMBLY

Multi-Display -- Removal



1. PRECAUTION
(CAMRY_ACV40 RM000002YLR01QX.html)
NOTICE:
After the ignition switch is turned off, the navigation receiver assembly (HDD navigation system) records various types of memory and settings. As a result, after turning the ignition switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle)


    Camry. Acv40 Gsv40

  1. Turn the shift lever knob counterclockwise and remove the shift lever knob sub-assembly.



4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)


    Camry. Acv40 Gsv40

  1. Turn the shift lever knob counterclockwise and remove the shift lever knob sub-assembly.



5. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH


    Camry. Acv40 Gsv40

  1. Disengage the 2 clips and remove the No. 1 instrument cluster finish panel garnish.



6. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH


    Camry. Acv40 Gsv40

  1. Disengage the 2 clips and remove the No. 2 instrument cluster finish panel garnish.



7. REMOVE FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY (for Automatic Transaxle)


    Camry. Acv40 Gsv40

  1. Disengage the 6 claws and the 3 clips, and then remove the floor shift position indicator housing sub-assembly.

  1. with Seat Heater System:

    1. Disconnect each connector.



8. REMOVE UPPER CONSOLE PANEL (for Manual Transaxle)


    Camry. Acv40 Gsv40.Navigation.Navigation System.Multi-Display Removal

  1. Open the lid of the upper console panel.

  1. Apply protective tape to the area shown in the illustration.



    Camry. Acv40 Gsv40

  1. Using a moulding remover, disengage the 2 claws and the 5 clips, and then remove the upper console panel as shown in the illustration.

  1. with Seat Heater System:

    1. Disconnect each connector.



9. REMOVE UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Automatic Transaxle)


    Camry. Acv40 Gsv40

  1. Disengage the 3 claws and the 5 clips.

  1. Disconnect the connector and remove the upper console rear panel sub-assembly.



10. REMOVE UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Manual Transaxle)


    Camry. Acv40 Gsv40

  1. Disengage the 3 claws and the 5 clips, and remove the upper console rear panel sub-assembly.



11. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY


    Camry. Acv40 Gsv40.Navigation.Navigation System.Multi-Display Removal

  1. Remove the 2 screws <F>.

  1. Disengage the 4 claws.

  1. Disconnect each connector and remove the upper console panel sub-assembly.

    HINT:
    Set the shift lever in the D position.


12. REMOVE INSTRUMENT PANEL NO. 2 REGISTER ASSEMBLY


    Camry. Acv40 Gsv40.Navigation.Navigation System.Multi-Display Removal

  1. Apply protective tape to the areas shown in the illustration.



    Camry. Acv40 Gsv40

  1. Using a moulding remover, disengage the 3 clips.



    Camry. Acv40 Gsv40

  1. Using a moulding remover, disengage the 4 clips.

  1. Disconnect the connector and remove the instrument panel No. 2 register assembly.



13. REMOVE NAVIGATION RECEIVER WITH HEATER CONTROL PANEL ASSEMBLY


    Camry. Acv40 Gsv40

  1. Remove the 4 bolts.

  1. Pull the navigation receiver with heater control panel assembly toward the rear of the vehicle and disengage the 4 clips.

  1. Disconnect each connector and remove the navigation receiver with heater control panel assembly.



14. REMOVE RADIO NO. 1 BRACKET


    Camry. Acv40 Gsv40

  1. Remove the 5 bolts and radio No. 1 bracket.



15. REMOVE RADIO NO. 2 BRACKET


    Camry. Acv40 Gsv40

  1. Remove the 5 bolts and radio No. 2 bracket.



16. REMOVE NAVIGATION RECEIVER ASSEMBLY


    Camry. Acv40 Gsv40

  1. Remove the navigation receiver assembly as shown in the illustration.