INSTALL LOWER INSTRUMENT PANEL FINISH PANEL (w/o Entry and Start System)
INSTALL LOWER INSTRUMENT PANEL FINISH PANEL (w/ Entry and Start System)
Combination Meter -- Installation |
| 1. INSTALL COMBINATION METER ASSEMBLY |
Connect the 2 connectors as shown in the illustration.
 |
Secure the wire harness to the combination meter assembly.
Install the combination meter assembly as shown in the illustration.
 |
Install the 4 screws.
 |
| 2. INSTALL INSTRUMENT CLUSTER FINISH PANEL NO.1 |
Engage the guide and the 4 claws.
 |
Install the instrument cluster finish panel with the 2 clips.
| 3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL (w/o Entry and Start System) |
Engage the 2 claws and 2 clips to install the lower instrument panel finish panel.
 |
| 4. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL (w/ Entry and Start System) |
Connect the connector.
Engage the 2 claws and 2 clips to install the lower instrument panel finish panel.
 |
| 5. INSTALL NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY |
Connect each connector.
Engage the 3 claws and 2 clips to install the No. 1 instrument panel sub-assembly.
 |
| 6. INSTALL STEERING COLUMN COVER |
Engage the claw and install the upper steering column cover.
 |
Engage the 2 claws.
 |
Install the lower steering column cover with the 2 screws.
- Torque:
- 2.0 N*m{20 kgf*cm, 18 in.*lbf}
| 7. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL LH |
Install the air hose and connect the connector.
Engage the claw and the 4 clips.
 |
Connect the hood lock control cable assembly.
Engage the 2 claws and connect the connector.
Install the lower instrument panel finish panel LH with the screw and bolt.
| 8. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH |
Engage the 2 clips.
 |
Install the cowl side trim sub-assembly LH with the cowl side trim clip.
| 9. INSTALL FRONT DOOR SCUFF PLATE LH |
Engage the 7 claws and 3 clips, then install the front door scuff plate LH.
 |
| 10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |