Combination Meter Removal

Body Electrical. Camry. Acv40 Gsv40
Meter. Camry. Acv40 Gsv40

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE FRONT DOOR SCUFF PLATE LH

  3. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH

  4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL LH

  5. REMOVE STEERING COLUMN COVER

  6. REMOVE NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY

  7. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL

  8. REMOVE INSTRUMENT CLUSTER FINISH PANEL NO.1

  9. REMOVE COMBINATION METER ASSEMBLY

Combination Meter -- Removal



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait for 90 seconds after disconnecting the cable to prevent airbag deployment (CAMRY_ACV40 RM000000KT1016X.html).


2. REMOVE FRONT DOOR SCUFF PLATE LH


    Camry. Acv40 Gsv40

  1. Disengage the 7 claws and 3 clips, and remove the front door scuff plate LH.



3. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH


    Camry. Acv40 Gsv40.Meter.Meter / Gauge System.Combination Meter Removal

  1. Remove the cowl side trim clip.

  1. Disengage the 2 clips and remove the cowl side trim sub-assembly LH.



4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL LH


    Camry. Acv40 Gsv40

  1. Remove the screw and the bolt.

  1. Disconnect the hood lock control cable assembly.

  1. Disengage the claw and the 4 clips.

  1. Disengage the 2 claws and disconnect the connector.

  1. Remove the air hose, disconnect the connector, and then remove the lower instrument panel finish panel LH.



5. REMOVE STEERING COLUMN COVER


    Camry. Acv40 Gsv40

  1. Turn the steering wheel assembly to the right and remove the screw as shown in the illustration.



    Camry. Acv40 Gsv40

  1. Turn the steering wheel assembly to the left and remove the screw as shown in the illustration.



    Camry. Acv40 Gsv40

  1. Disengage the 2 claws and remove the steering column cover lower.



    Camry. Acv40 Gsv40

  1. Disengage the claw and remove the steering column cover upper.



6. REMOVE NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY


    Camry. Acv40 Gsv40

  1. Disengage the 3 claws and the 2 clips.

  1. Disconnect each connector and remove the instrument panel sub-assembly.



7. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL


    Camry. Acv40 Gsv40

  1. Disengage the 2 claws and 2 clips, and then remove the lower instrument panel finish panel.



8. REMOVE INSTRUMENT CLUSTER FINISH PANEL NO.1


    Camry. Acv40 Gsv40.Meter.Meter / Gauge System.Combination Meter Removal

  1. Remove the 2 clips.

  1. Disengage the guide and 4 claws, and then remove the instrument cluster finish panel.



9. REMOVE COMBINATION METER ASSEMBLY

  1. Using the tilt and telescopic functions, fully lower and extend the steering wheel.



    Camry. Acv40 Gsv40

  1. Remove the 4 screws.



    Camry. Acv40 Gsv40

  1. Disconnect the 2 connectors.

  1. Disengage the wire harness from the combination meter assembly.



    Camry. Acv40 Gsv40

  1. Remove the combination meter assembly as shown in the illustration.