INSTALL TRANSMISSION WIRE

CONNECT TRANSMISSION WIRE

INSTALL VALVE BODY OIL STRAINER ASSEMBLY

INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY

INSTALL NO. 1 EXHAUST PIPE SUPPORT BRACKET SUB-ASSEMBLY

ADD AUTOMATIC TRANSMISSION FLUID

INSTALL NO. 2 ENGINE UNDER COVER

RESET MEMORY

Coat a new O-ring with ATF and install it to the transmission wire.

Install the transmission wire with the bolt.

• Torque:
• 5.4 N*m{ 55 kgf*cm, 48 in.*lbf}

Connect the transmission wire connector.

Connect the 9 connectors to the solenoid valves.

Install the ATF temperature sensor with the bolt.

• Torque:
• 10 N*m{ 102 kgf*cm, 7 ft.*lbf}

Install the 2 clamps with the 2 bolts.

• Torque:
• Bolt A:
• 6.4 N*m{ 65 kgf*cm, 57 in.*lbf}
• Bolt B:
• 10 N*m{ 102 kgf*cm, 7 ft.*lbf}

Coat a new O-ring with ATF.

Install the O-ring.

Install the oil strainer with the 4 bolts.

• Torque:
• 10 N*m{ 102 kgf*cm, 7 ft.*lbf}

Install the 3 magnets in the oil pan.

Install a new gasket and the oil pan to the transmission case with the 20 bolts.

• Torque:
• 4.4 N*m{ 45 kgf*cm, 39 in.*lbf}

Install the No. 1 exhaust pipe support bracket sub-assembly to the automatic transmission assembly with the 2 bolts.

• Torque:
• 43 N*m{ 438 kgf*cm, 32 ft.*lbf}