Heater & Air Conditioning System. Camry. Acv40 Gsv40
Air Conditioning. Camry. Acv40 Gsv40
Plasmacluster -- Installation |
| 1. INSTALL PLASMACLUSTER |
Install the plasma cluster with the 2 screws.
- Torque:
- 5.4 N*m{55 kgf*cm, 48 in.*lbf}
 |
| 2. INSTALL NO. 1 HEATER TO REGISTER DUCT |
Install the No. 1 heater to register duct with the 3 screws <F>.
 |
| 3. INSTALL SIDE NO. 1 DEFROSTER NOZZLE DUCT |
Install the side No. 1 defroster nozzle duct with the screw <F>.
 |
| 4. INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY |
Install the instrument panel safety pad assembly (CAMRY_ACV40 RM0000024DA049X.html).
| 5. CONNECT NEGATIVE BATTERY TERMINAL |
| 6. INSPECT STEERING PAD |
With the steering pad installed on the vehicle, perform a visual check. If there are any defects as mentioned below, replace the steering pad with a new one:
- Cuts, minute cracks or marked discoloration on the steering pad top surface or in the grooved portion.
- Cuts, minute cracks or marked discoloration on the steering pad top surface or in the grooved portion.
 |
Make sure that the horn sounds.
- HINT:
- If the horn does not sound, inspect the horn system (CAMRY_ACV40 RM0000016F502OX.html).
| 7. INSPECT SRS WARNING LIGHT |