Power Steering Link Removal

Steering. Camry. Acv40 Gsv40
Power Steering. Camry. Acv40 Gsv40

  1. PRECAUTION (w/ Navigation System for HDD)

  2. PLACE FRONT WHEELS FACING STRAIGHT AHEAD

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  4. REMOVE FRONT WHEELS

  5. SEPARATE STEERING SLIDING YOKE

  6. SEPARATE TIE ROD ASSEMBLY LH

  7. SEPARATE TIE ROD ASSEMBLY RH

  8. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE

  9. DISCONNECT PRESSURE FEED TUBE ASSEMBLY (for LHD)

  10. DISCONNECT STEERING GEAR OUTLET RETURN TUBE (for 2AZ-FE RHD)

  11. REMOVE RETURN TUBE ASSEMBLY (for 2AZ-FE RHD)

  12. DISCONNECT PRESSURE FEED TUBE ASSEMBLY (for 2AZ-FE RHD)

  13. DISCONNECT STEERING GEAR OUTLET RETURN TUBE (for 2GR-FE RHD)

  14. REMOVE RETURN TUBE ASSEMBLY (for 2GR-FE RHD)

  15. DISCONNECT PRESSURE FEED TUBE ASSEMBLY (for 2GR-FE RHD)

  16. REMOVE POWER STEERING LINK ASSEMBLY

  17. REMOVE POWER STEERING RACK HOUSING HEAT INSULATOR (for 2GR-FE LHD)

  18. REMOVE POWER STEERING RACK HOUSING HEAT INSULATOR (for 2GR-FE RHD)

Power Steering Link -- Removal



1. PRECAUTION (w/ Navigation System for HDD)
NOTICE:
After the ignition switch is turned off, the navigation receiver assembly (HDD navigation system) records various types of memory and settings. As a result, after turning the ignition switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.


2. PLACE FRONT WHEELS FACING STRAIGHT AHEAD


3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


4. REMOVE FRONT WHEELS


5. SEPARATE STEERING SLIDING YOKE


    Camry. Acv40 Gsv40

  1. Secure the steering wheel with the seat belt in order to prevent rotation.

    HINT:
    This operation is useful to prevent damage to the spiral cable.


    Camry. Acv40 Gsv40.Power Steering.Power Steering System.Power Steering Link Removal

  1. Remove the bolt and slide the steering sliding yoke.

    NOTICE:
    Do not separate the steering sliding yoke from the power steering link assembly.


    Camry. Acv40 Gsv40.Power Steering.Power Steering System.Power Steering Link Removal

  1. Put matchmarks on the steering sliding yoke and the power steering link assembly.

  1. Separate the steering sliding yoke from the power steering link assembly.



6. SEPARATE TIE ROD ASSEMBLY LH

  1. Remove the cotter pin and the nut.



    Camry. Acv40 Gsv40.Power Steering.Power Steering System.Power Steering Link Removal

  1. Using SST, separate the tie rod assembly LH from the steering knuckle.

    SST
    09628-00011
    NOTICE:
    1. Hang SST with a string, etc. to prevent it from falling.
    2. Do not damage the front disc brake dust cover.
    3. Do not damage the ball joint dust cover.
    4. Do not damage the steering knuckle.


7. SEPARATE TIE ROD ASSEMBLY RH
HINT:
Perform the same procedure as for the LH side.


8. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE
HINT:
Refer to the instructions for removal of the engine assembly (CAMRY_ACV40 RM000000YIN01OX.html for 2GR-FE).


9. DISCONNECT PRESSURE FEED TUBE ASSEMBLY (for LHD)


    Camry. Acv40 Gsv40.Power Steering.Power Steering System.Power Steering Link Removal

  1. Using SST, disconnect the pressure feed tube assembly (return tube side) from the power steering link assembly.

    SST
    09023-12701


    Camry. Acv40 Gsv40.Power Steering.Power Steering System.Power Steering Link Removal

  1. Using SST, disconnect the pressure feed tube assembly (pressure feed tube side) from the power steering link assembly.

    SST
    09023-12701


    Camry. Acv40 Gsv40

  1. Remove the 2 bolts and separate the pressure feed tube clamp.



10. DISCONNECT STEERING GEAR OUTLET RETURN TUBE (for 2AZ-FE RHD)


    Camry. Acv40 Gsv40

  1. Slide the clip and disconnect the steering gear outlet return tube.



11. REMOVE RETURN TUBE ASSEMBLY (for 2AZ-FE RHD)


    Camry. Acv40 Gsv40.Power Steering.Power Steering System.Power Steering Link Removal

  1. Using SST, remove the return tube assembly from the power steering link assembly.

    SST
    09023-12701


12. DISCONNECT PRESSURE FEED TUBE ASSEMBLY (for 2AZ-FE RHD)


    Camry. Acv40 Gsv40.Power Steering.Power Steering System.Power Steering Link Removal

  1. Using SST, disconnect the pressure feed tube assembly from the power steering link assembly.

    SST
    09023-12701


    Camry. Acv40 Gsv40

  1. Remove the bolt and separate the pressure feed tube clamp.



13. DISCONNECT STEERING GEAR OUTLET RETURN TUBE (for 2GR-FE RHD)


    Camry. Acv40 Gsv40

  1. Slide the clip and disconnect the steering gear outlet return tube.



14. REMOVE RETURN TUBE ASSEMBLY (for 2GR-FE RHD)


    Camry. Acv40 Gsv40.Power Steering.Power Steering System.Power Steering Link Removal

  1. Using SST, remove the return tube assembly from the power steering link assembly.

    SST
    09023-12701


15. DISCONNECT PRESSURE FEED TUBE ASSEMBLY (for 2GR-FE RHD)


    Camry. Acv40 Gsv40.Power Steering.Power Steering System.Power Steering Link Removal

  1. Using SST, disconnect the pressure feed tube assembly from the power steering link assembly.

    SST
    09023-12701


    Camry. Acv40 Gsv40

  1. Remove the bolt and separate the pressure feed tube clamp.



16. REMOVE POWER STEERING LINK ASSEMBLY


    Camry. Acv40 Gsv40

  1. Remove the 2 bolts, 2 nuts, and the power steering link assembly.

    NOTICE:
    Because the nut has its own stopper, do not turn the nut. Loosen the bolt with the nut fixed.


17. REMOVE POWER STEERING RACK HOUSING HEAT INSULATOR (for 2GR-FE LHD)


    Camry. Acv40 Gsv40

  1. Remove the power steering rack housing heat insulator from the power steering link assembly.



18. REMOVE POWER STEERING RACK HOUSING HEAT INSULATOR (for 2GR-FE RHD)


    Camry. Acv40 Gsv40

  1. Remove the bolt and power steering rack housing heat insulator from the power steering link assembly.