Brake. Camry. Acv40 Gsv40
Brake Control. Camry. Acv40 Gsv40
Front Speed Sensor -- Inspection |
| 1. INSPECT FRONT SPEED SENSOR (w/o VSC) |
Inspect the front speed sensor. If any of the following occurs, replace the front speed sensor with a new one:
- The surface of the front speed sensor is cracked, dented, or chipped off.
- The connector or wire harness is scratched, cracked, or damaged.
- The front speed sensor has been dropped.
- The surface of the front speed sensor is cracked, dented, or chipped off.
Measure the resistance according to the value(s) in the table below.
- Standard resistance:
- LH:
Tester Connection Specified Condition 1 (FL+) - 2 (FL-) 1.4 to 1.8 kΩ at 20 °C (68°F) 1 (FL+) - Body ground 10 kΩ or higher 2 (FL-) - Body ground 10 kΩ or higher - RH:
Tester Connection Specified Condition 1 (FR+) - 2 (FR-) 1.4 to 1.8 kΩ at 20 °C (68°F) 1 (FR+) - Body ground 10 kΩ or higher 2 (FR-) - Body ground 10 kΩ or higher
 |
| 2. INSPECT FRONT SPEED SENSOR (w/ VSC) |
Inspect the front speed sensor. If any of the following occurs, replace the front speed sensor with a new one:
- The surface of the front speed sensor is cracked, dented, or chipped off.
- The connector or wire harness is scratched, cracked, or damaged.
- The front speed sensor has been dropped.
- The surface of the front speed sensor is cracked, dented, or chipped off.
Measure the resistance according to the value(s) in the table below.
- Standard resistance:
- LH:
Tester Connection Specified Condition 1 (FL+) - 2 (FL-) 1.4 to 1.8 kΩ at 20 °C (68°F) 1 (FL+) - Body ground 10 kΩ or higher 2 (FL-) - Body ground 10 kΩ or higher - RH:
Tester Connection Specified Condition 1 (FR+) - 2 (FR-) 1.4 to 1.8 kΩ at 20 °C (68°F) 1 (FR+) - Body ground 10 kΩ or higher 2 (FR-) - Body ground 10 kΩ or higher
 |