Shift Solenoid Valve Inspection

Transmission. Camry. Acv40 Gsv40
U660E Automatic Transaxle. Camry. Acv40 Gsv40

  1. INSPECT SHIFT SOLENOID VALVE SL

  2. INSPECT SHIFT SOLENOID VALVE SLT

  3. INSPECT SHIFT SOLENOID VALVE SLU

  4. INSPECT SHIFT SOLENOID VALVE SL2

  5. INSPECT SHIFT SOLENOID VALVE SL1

  6. INSPECT SHIFT SOLENOID VALVE SL3

  7. INSPECT SHIFT SOLENOID VALVE SL4

Shift Solenoid Valve -- Inspection



1. INSPECT SHIFT SOLENOID VALVE SL


    Camry. Acv40 Gsv40

  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance
    Tester Connection
    		Specified Condition
    20°C (68°F)
    Solenoid Connector (SL) - Solenoid Body (SL)
    		11 to 15 Ω
    If the value is not as specified, replace the shift solenoid valve.


    Camry. Acv40 Gsv40

  1. Connect the positive (+) lead to terminal 2 and the negative (-) lead to terminal 1 of the solenoid valve connector, then check the movement of the shift solenoid valve.

    OK:
    The solenoid makes an operating noise.
    If the operation is not as specified, replace the shift solenoid valve.


2. INSPECT SHIFT SOLENOID VALVE SLT


    Camry. Acv40 Gsv40.U660E Automatic Transaxle.Automatic Transaxle System.Shift Solenoid Valve Inspection

  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance
    Tester Connection
    		Specified Condition
    20°C (68°F)
    1 - 2
    		5.0 to 5.6 Ω
    If the value is not as specified, replace the shift solenoid valve.

  1. Connect the positive (+) lead with a 21 W bulb to terminal 2 and the negative (-) lead to terminal 1 of the solenoid valve connector, then check the movement of the shift solenoid valve.

    OK:
    The solenoid makes an operating noise.
    If the operation is not as specified, replace the shift solenoid valve.


3. INSPECT SHIFT SOLENOID VALVE SLU


    Camry. Acv40 Gsv40.U660E Automatic Transaxle.Automatic Transaxle System.Shift Solenoid Valve Inspection

  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance
    Tester Connection
    		Specified Condition
    20°C (68°F)
    1 - 2
    		5.0 to 5.6 Ω
    If the value is not as specified, replace the shift solenoid valve.

  1. Connect the positive (+) lead with a 21 W bulb to terminal 2 and the negative (-) lead to terminal 1 of the solenoid valve connector, then check the movement of the shift solenoid valve.

    OK:
    The solenoid makes an operating noise.
    If the operation is not as specified, replace the shift solenoid valve.


4. INSPECT SHIFT SOLENOID VALVE SL2


    Camry. Acv40 Gsv40.U660E Automatic Transaxle.Automatic Transaxle System.Shift Solenoid Valve Inspection

  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance
    Tester Connection
    		Specified Condition
    20°C (68°F)
    1 - 2
    		5.0 to 5.6 Ω
    If the value is not as specified, replace the shift solenoid valve.

  1. Connect the positive (+) lead with a 21 W bulb to terminal 2 and the negative (-) lead to terminal 1 of the solenoid valve connector, then check the movement of the shift solenoid valve.

    OK:
    The solenoid makes an operating noise.
    If the operation is not as specified, replace the shift solenoid valve.


5. INSPECT SHIFT SOLENOID VALVE SL1


    Camry. Acv40 Gsv40.U660E Automatic Transaxle.Automatic Transaxle System.Shift Solenoid Valve Inspection

  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance
    Tester Connection
    		Specified Condition
    20°C (68°F)
    1 - 2
    		5.0 to 5.6 Ω
    If the value is not as specified, replace the shift solenoid valve.

  1. Connect the positive (+) lead with a 21 W bulb to terminal 2 and the negative (-) lead to terminal 1 of the solenoid valve connector, then check the movement of the shift solenoid valve.

    OK:
    The solenoid makes an operating noise.
    If the operation is not as specified, replace the shift solenoid valve.


6. INSPECT SHIFT SOLENOID VALVE SL3


    Camry. Acv40 Gsv40.U660E Automatic Transaxle.Automatic Transaxle System.Shift Solenoid Valve Inspection

  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance
    Tester Connection
    		Specified Condition
    20°C (68°F)
    1 - 2
    		5.0 to 5.6 Ω
    If the value is not as specified, replace the shift solenoid valve.

  1. Connect the positive (+) lead with a 21 W bulb to terminal 2 and the negative (-) lead to terminal 1 of the solenoid valve connector, then check the movement of the shift solenoid valve.

    OK:
    The solenoid makes an operating noise.
    If the operation is not as specified, replace the shift solenoid valve.


7. INSPECT SHIFT SOLENOID VALVE SL4


    Camry. Acv40 Gsv40.U660E Automatic Transaxle.Automatic Transaxle System.Shift Solenoid Valve Inspection

  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance
    Tester Connection
    		Specified Condition
    20°C (68°F)
    1 - 2
    		5.0 to 5.6 Ω
    If the value is not as specified, replace the shift solenoid valve.

  1. Connect the positive (+) lead with a 21 W bulb to terminal 2 and the negative (-) lead to terminal 1 of the solenoid valve connector, then check the movement of the shift solenoid valve.

    OK:
    The solenoid makes an operating noise.
    If the operation is not as specified, replace the shift solenoid valve.