Shift Solenoid Valve Inspection

Transmission. Camry. Acv40 Gsv40
U250E Automatic Transaxle. Camry. Acv40 Gsv40

  1. INSPECT SHIFT SOLENOID VALVE SL3

  2. INSPECT SHIFT SOLENOID VALVE SLT

  3. INSPECT SHIFT SOLENOID VALVE S4

  4. INSPECT SHIFT SOLENOID VALVE SR

  5. INSPECT SHIFT SOLENOID VALVE DSL

  6. INSPECT SHIFT SOLENOID VALVE SL2

  7. INSPECT SHIFT SOLENOID VALVE SL1

Shift Solenoid Valve -- Inspection



1. INSPECT SHIFT SOLENOID VALVE SL3


    Camry. Acv40 Gsv40.U250E Automatic Transaxle.Automatic Transaxle System.Shift Solenoid Valve Inspection

  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    		Specified Condition
    20°C (68°F)
    1 - 2
    		5.0 to 5.6 Ω
    If the value is not as specified, replace the shift solenoid valve.

  1. Connect the positive (+) lead to terminal 2 of the solenoid connector, and the negative (-) lead to terminal 1 of the solenoid connector.

    OK:
    The solenoid valve makes an operating sound.
    If the result is not as specified, replace the shift solenoid valve.


2. INSPECT SHIFT SOLENOID VALVE SLT


    Camry. Acv40 Gsv40.U250E Automatic Transaxle.Automatic Transaxle System.Shift Solenoid Valve Inspection

  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    		Specified Condition
    20°C (68°F)
    1 - 2
    		5.0 to 5.6 Ω
    If the value is not as specified, replace the shift solenoid valve.

  1. Connect the positive (+) lead to terminal 2 of the solenoid connector, and the negative (-) lead to terminal 1 of the solenoid connector.

    OK:
    The solenoid valve makes an operating sound.
    If the result is not as specified, replace the shift solenoid valve.


3. INSPECT SHIFT SOLENOID VALVE S4


    Camry. Acv40 Gsv40.U250E Automatic Transaxle.Automatic Transaxle System.Shift Solenoid Valve Inspection

  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    		Specified Condition
    20°C (68°F)
    Solenoid Connector (S4) - Solenoid Body (S4)
    		11 to 15 Ω
    If the value is not as specified, replace the shift solenoid valve.

  1. Connect the positive (+) lead to the terminal of the solenoid connector, and the negative (-) lead to the solenoid body.

    OK:
    The solenoid valve makes an operating sound.
    If the result is not as specified, replace the shift solenoid valve.


4. INSPECT SHIFT SOLENOID VALVE SR


    Camry. Acv40 Gsv40.U250E Automatic Transaxle.Automatic Transaxle System.Shift Solenoid Valve Inspection

  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    		Specified Condition
    20°C (68°F)
    Solenoid Connector (SR) - Solenoid Body (SR)
    		11 to 15 Ω
    If the value is not as specified, replace the shift solenoid valve.

  1. Connect the positive (+) lead to the terminal of the solenoid connector, and the negative (-) lead to the solenoid body.

    OK:
    The solenoid valve makes an operating sound.
    If the result is not as specified, replace the shift solenoid valve.


5. INSPECT SHIFT SOLENOID VALVE DSL


    Camry. Acv40 Gsv40.U250E Automatic Transaxle.Automatic Transaxle System.Shift Solenoid Valve Inspection

  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    		Specified Condition
    20°C (68°F)
    Solenoid Connector (DSL) - Solenoid Body (DSL)
    		11 to 15 Ω
    If the value is not as specified, replace the shift solenoid valve.

  1. Connect the positive (+) lead to the terminal of the solenoid connector, and the negative (-) lead to the solenoid body.

    OK:
    The solenoid valve makes an operating sound.
    If the result is not as specified, replace the shift solenoid valve.


6. INSPECT SHIFT SOLENOID VALVE SL2


    Camry. Acv40 Gsv40.U250E Automatic Transaxle.Automatic Transaxle System.Shift Solenoid Valve Inspection

  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    		Specified Condition
    20°C (68°F)
    1 - 2
    		5.0 to 5.6 Ω
    If the value is not as specified, replace the shift solenoid valve.

  1. Connect the positive (+) lead to terminal 2 of the solenoid connector, and the negative (-) lead to terminal 1 of the solenoid connector.

    OK:
    The solenoid valve makes an operating sound.
    If the result is not as specified, replace the shift solenoid valve.


7. INSPECT SHIFT SOLENOID VALVE SL1


    Camry. Acv40 Gsv40.U250E Automatic Transaxle.Automatic Transaxle System.Shift Solenoid Valve Inspection

  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    		Specified Condition
    20°C (68°F)
    1 - 2
    		5.0 to 5.6 Ω
    If the value is not as specified, replace the shift solenoid valve.

  1. Connect the positive (+) lead to terminal 2 of the solenoid connector, and the negative (-) lead to terminal 1 of the solenoid connector.

    OK:
    The solenoid valve makes an operating sound.
    If the result is not as specified, replace the shift solenoid valve.