Shift Lever Adjustment

Move the shift lever to the N position.

Remove the nut from the control shaft lever.

Disconnect the transmission control cable assembly from the control shaft lever.

Push the control shaft fully downward.

Return the control shaft lever 2 notches to the N position.

Move the slider in the directions indicated by the arrows and pull up the lock piece.

NOTICE:

Do not damage the boot.

Connect the transmission control cable assembly to the control shaft lever with the nut.

Torque:

15 N*m{150 kgf*cm, 11 ft.*lbf}

Push in the lock piece.

NOTICE:

Firmly push in the lock piece until the slider lock is engaged.

Start the engine and make sure that the vehicle moves forward when moving the lever from the N to the D position and moves rearward when moving it to the R position.
If it becomes hard to move the shift lever, readjust the shift lever position.