Shift Lever Removal

Disengage the 7 claws and 3 clips, and remove the front door scuff plate LH.

Remove the cowl side trim clip.

Disengage the 2 clips and remove the cowl side trim sub-assembly LH.

Remove the bolt <A> and the screw <B>.

Disengage the 2 claws and the DLC3.

Disconnect the hood lock control cable assembly.

Disengage the claw and the 4 clips.

Remove the air hose, disconnect the connector, and then remove the lower instrument panel finish panel LH.

Disengage the 2 claws and 2 clips, and then remove the lower instrument panel finish panel.

Turn the shift lever knob counterclockwise and remove the shift lever knob sub-assembly.

Disengage the 2 clips and remove the No. 1 instrument cluster finish panel garnish.

Disengage the 2 clips and remove the No. 2 instrument cluster finish panel garnish.

Disengage the 6 claws and the 3 clips, and then remove the floor shift position indicator housing sub-assembly.

with Seat Heater System:

1. Disconnect each connector.
   

Disengage the 3 claws and the 5 clips.

Disconnect the connector and remove the upper console rear panel sub-assembly.

Remove the 2 screws <F>.

Disengage the 4 claws.

Disconnect each connector and remove the upper console panel sub-assembly.

HINT:

Set the shift lever in the D position.

Remove the console box pocket.

Remove the console box carpet.

Remove the 2 screws <F>.

Remove the 2 bolts <G> and the console box assembly.

Remove the 3 screws <F>.

Disengage the clip and remove the No. 2 console box insert front.

Release the clamp.

Turn back the floor carpet.

Remove the 3 clips.

Remove the floor carpet bracket LH.

Disconnect the end of the transmission control cable assembly from the shift lock control unit.

Disconnect the transmission control cable assembly from the shift lock control unit.

Disconnect the shift lock control ECU connector and transmission control switch wire connector.

Remove the 4 bolts and shift lever.