Sfi System Basic Inspection

Engine. Camry. Acv40 Gsv40
2Az-Fe Engine Control System. Camry. Acv40 Gsv40

  1. CHECK BATTERY VOLTAGE

  2. CHECK WHETHER ENGINE CRANKS

  3. CHECK WHETHER ENGINE STARTS

  4. CHECK AIR FILTER

  5. CHECK IDLING SPEED

  6. CHECK FUEL PRESSURE

  7. CHECK FOR SPARKS

Sfi System -- Basic Inspection


When the malfunction is not confirmed by the DTC check, troubleshooting should be carried out in all circuits considered to be possible causes of the problem. In many cases, by carrying out the basic engine check shown in the following flowchart, the location of the problem can be found quickly and efficiently. Therefore, using this check is essential when engine troubleshooting.
1.CHECK BATTERY VOLTAGE
    NOTICE:
    Conduct this check with the engine stopped and ignition switch off.
    Result:
    Result
    		Proceed to
    11 V or more
    		OK
    Below 11 V
    		NG


NG.
CHARGE OR REPLACE BATTERY
OK


2.CHECK WHETHER ENGINE CRANKS


    		NG.
    PROCEED TO PROBLEM SYMPTOMS TABLE
    OK


    3.CHECK WHETHER ENGINE STARTS


      		NG.
      GO TO STEP 6
      OK


      4.CHECK AIR FILTER

      1. Visually check that the air filter is not excessively contaminated with dirt or oil.



      		NG.
      REPLACE AIR FILTER
      OK


      5.CHECK IDLING SPEED


        		NG.
        TROUBLESHOOT IDLING SPEED AND PROCEED TO NEXT STEP
        OK


        6.CHECK FUEL PRESSURE


          		NG.
          TROUBLESHOOT FUEL PRESSURE AND PROCEED TO NEXT STEP
          OK


          7.CHECK FOR SPARKS


            		NG.
            TROUBLESHOOT SPARK AND PROCEED TO NEXT STEP
            OK

            PROCEED TO PROBLEM SYMPTOMS TABLE