Body Electrical. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
Other System. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
Rear Power Outlet Socket (For Short Body) -- Installation |
| 1. INSTALL REAR POWER OUTLET SOCKET ASSEMBLY |
 |
Attach the 2 claw fittings to install the socket.
| 2. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH |
 |
Install the belt hanger to the trim board.
Connect the power outlet socket connector.
Attach the 5 clips and 5 claws to install the trim board.
Install the bolt and 2 screws.
Connect the rear No.1 seat belt's floor anchor.
Connect the floor anchor with the bolt.
- Torque:
- 42 N*m{428 kgf*cm, 31 ft.*lbf}
Install the anchor cover.
 |
| 3. INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR BRACKET |
 |
Align the bracket positioning hole with the claws and install the bracket with the bolt, 2 washers and collar.
- Torque:
- 42 N*m{428 kgf*cm, 31 ft.*lbf}
| 4. INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR COVER |
 |
Attach the 4 claws to install the cover.
| 5. INSTALL RECLINING REMOTE CONTROL LEVER BEZEL LH |
| 6. INSTALL REAR FLOOR FINISH PLATE |
Attach the 6 clips to install the finish plate.
 |
| 7. INSTALL BACK DOOR WEATHERSTRIP |
| 8. INSTALL REAR FLOOR NO. 1 MAT SUPPORT SIDE PLATE |
 |
Attach the 7 clips to install the side plate.
Install the 4 screws.
| 9. INSTALL JACK CARRIER ASSEMBLY |
Install the jack carrier with the 7 clips.
 |
| 10. INSTALL REAR FLOOR NO. 2 BOARD |
| 11. INSTALL REAR FLOOR NO. 3 BOARD |
| 12. INSTALL DECK BOARD ASSEMBLY |
| 13. INSTALL REAR FLOOR NO. 1 BOARD |
| 14. INSTALL TONNEAU COVER ASSEMBLY |
| 15. INSTALL PACKAGE TRAY TRIM POCKET SUB-ASSEMBLY |
| 16. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH |
| 17. INSTALL REAR DOOR SCUFF PLATE LH |
Attach the 8 claws to install the scuff plate.
 |
| 18. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |