Navigation System (For Dvd) Gps Mark Is Not Displayed

INSPECTION PROCEDURE

CHECK CABIN

CHECK SURROUNDINGS

CHECK GPS INFORMATION (NAVIGATION CHECK MODE)

INSPECTION PROCEDURE

1. Check the cabin for any object that might interrupt radio reception on the instrument panel. If such an object exists, remove it and check if the GPS mark reappears.
   

   HINT:

   The GPS uses extremely weak radio waves originating from satellites. If the signal is interrupted by obstructions or other radio waves, the GPS may not be able to properly receive the signal.

   OK:

   Mark appears.
   

1. Check if the vehicle is in a location where GPS signal reception is poor. If the vehicle is in such a place, relocate the vehicle and check if the GPS mark reappears.
   

   HINT:

   The GPS uses 24 satellites in 6 orbits. At any point in time, 4 satellites should be able to pinpoint the vehicle. However, GPS signals may not reach the vehicle due to influence from the surroundings, vehicle direction and time. For examples, see the illustration below.

   
   
   
   

   OK:

   GPS mark is displayed.
   

1. Enter the "Navigation Check" mode and select "GPS Information" (RAV4_ACA30 RM000003A3N00LX.html).
   

2. Check how many of the following codes appear in the "STS" column.
   

   for DENSO Made:

   T, P
   

   for AISIN AW Made:

   08H, 04H
   

   OK:

   At least 3 codes appear.