Audio And Visual System Sound Signal Circuit Between Radio Receiver And Stereo Jack Adapter
DESCRIPTION
WIRING DIAGRAM
INSPECTION PROCEDURE
CHECK HARNESS AND CONNECTOR (RADIO RECEIVER - STEREO JACK ADAPTER)
AUDIO AND VISUAL SYSTEM - Sound Signal Circuit between Radio Receiver and Stereo Jack Adapter |
DESCRIPTION
This circuit sends an external device sound signal from the stereo jack adapter to the radio receiver.
WIRING DIAGRAM
INSPECTION PROCEDURE
| 1.CHECK HARNESS AND CONNECTOR (RADIO RECEIVER - STEREO JACK ADAPTER) |
Disconnect the E107 radio receiver connector.
Disconnect the E100 stereo jack adapter connector.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
| Specified Condition
|
E107-17 (ALI) - E100-1 (ALO)
| Below 1 Ω
|
E107-15 (ARI) - E100-2 (ARO)
| Below 1 Ω
|
E107-16 (ASGN) - E100-3 (ASGN)
| Below 1 Ω
|
E107-18 (AGND) - E100-5 (AGND)
| Below 1 Ω
|
E107-19 (AUXI) - E100-4 (AUXO)
| Below 1 Ω
|
E107-17 (ALI) - Body ground
| 10 kΩ or higher
|
E107-15 (ARI) - Body ground
| 10 kΩ or higher
|
E107-16 (ASGN) - Body ground
| 10 kΩ or higher
|
E107-18 (AGND) - Body ground
| 10 kΩ or higher
|
E107-19 (AUXI) - Body ground
| 10 kΩ or higher
|
| | REPAIR OR REPLACE HARNESS OR CONNECTOR |
|
|
| OK |
|
|
|
| PROCEED TO NEXT INSPECTION PROCEDURE SHOWN IN PROBLEM SYMPTOMS TABLE |
|
