Power Door Lock Control System How To Proceed With Troubleshooting

Body Electrical. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
Door Lock. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. VEHICLE BROUGHT TO WORKSHOP

  2. INSPECT BATTERY VOLTAGE

  3. CHECK FOR DTC*

  4. PROBLEM SYMPTOMS TABLE

  5. OVERALL ANALYSIS AND TROUBLESHOOTING*

  6. ADJUST, REPAIR OR REPLACE

  7. CONFIRMATION TEST

Power Door Lock Control System -- How To Proceed With Troubleshooting


HINT:
  1. Use the procedures below to troubleshoot the power door lock control system.
  2. *: Use the Intelligent tester.


1.VEHICLE BROUGHT TO WORKSHOP

    NEXT


    2.INSPECT BATTERY VOLTAGE
      Standard voltage:
      11 to 14 V
      If the voltage is below 11 V, recharge or replace the battery before proceeding.

    NEXT


    3.CHECK FOR DTC*

    1. Check for DTCs and note any codes that are output.

    2. Delete the DTCs.

    3. Recheck for DTCs. Try to prompt the DTC by simulating the original activity that the DTC suggests.

      Result
      Result
      		Proceed to
      DTC is not output
      		A
      DTC is output
      		B



    		B.
    Go to step 6
    A


    4.PROBLEM SYMPTOMS TABLE

      Result
      Result
      		Proceed to
      Fault is not listed in problem symptoms table
      		A
      Fault is listed on problem symptoms table
      		B


    		B.
    Go to step 6
    A


    5.OVERALL ANALYSIS AND TROUBLESHOOTING*

    1. Operation Check (RAV4_ACA30 RM000001Y7M006X.html ).

    2. Terminal of ECU (RAV4_ACA30 RM000001Y7J006X.html).

    3. Data List / Active Test (RAV4_ACA30 RM000001Y7N009X.html).


    NEXT


    6.ADJUST, REPAIR OR REPLACE

      NEXT


      7.CONFIRMATION TEST

        NEXT

        END