Hazard Warning Switch Inspection

Body Electrical. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
Lighting. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. INSPECT HAZARD WARNING SIGNAL SWITCH ASSEMBLY

Hazard Warning Switch -- Inspection



1. INSPECT HAZARD WARNING SIGNAL SWITCH ASSEMBLY


    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Lighting.Lighting System.Hazard Warning Switch Inspection

  1. Measure the resistance of the switch.

    Standard resistance:
    Tester Connection
    		Switch Condition
    		Specified Condition
    4 (TB) - 1 (E)
    		OFF (Not pushed)
    		10 kΩ or higher
    4 (TB) - 1 (E)
    		ON (Pushed)
    		Below 23.4 Ω
    If the result is not as specified, replace the switch assembly.

  1. Inspect the switch illumination.

    1. Connect the battery positive (+) lead to terminal 3 (ILL+) and the negative (-) lead to terminal 2 (ILL-), then check that the light comes on.

      OK:
      LED comes on.
      If the result is not as specified, replace the light.