Vanity Light Removal

Body Electrical. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
Lighting. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE VANITY LIGHT ASSEMBLY

  3. REMOVE VANITY LIGHT BULB

Vanity Light -- Removal


HINT:
  1. Use the same procedures for the RH and LH sides.
  2. The procedures listed below are for the LH side.


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
NOTICE:
w/ Navigation System for HDD:
After the ignition switch is turned off, the HDD navigation system requires approximately a minute to record various types of memory and settings. As a result, after turning the ignition switch off, wait a minute or more before disconnecting the cable from the negative (-) battery terminal.


2. REMOVE VANITY LIGHT ASSEMBLY


    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. Using a screwdriver, pry out the vanity light assembly.

    HINT:
    Tape the screwdriver tip before use.


    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. Detach the 2 claws and vanity light.



3. REMOVE VANITY LIGHT BULB


    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. Remove the light bulb from the vanity light.