Fog Light Assembly (W/O Hood Moulding) Installation
Lighting. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
INSTALL FOG LIGHT ASSEMBLY LH
INSTALL FRONT BUMPER COVER (w/o Under Guard)
INSTALL FRONT BUMPER COVER (w/ Under Guard)
INSTALL FRONT FENDER FRONT SPLASH SHIELD LH
INSTALL FRONT FENDER FRONT SPLASH SHIELD RH
INSTALL RADIATOR GRILLE PROTECTOR
INSTALL HOOD CENTER CUSHION
INSTALL RADIATOR SUPPORT OPENING COVER
Fog Light Assembly (W/O Hood Moulding) -- Installation |
| 1. INSTALL FOG LIGHT ASSEMBLY LH |
Attach the 2 guides to install the fog light.
Install the screw.
| 2. INSTALL FRONT BUMPER COVER (w/o Under Guard) |
| 3. INSTALL FRONT BUMPER COVER (w/ Under Guard) |
w/ Fog Light:
Connect the 2 fog light connectors.
Attach the 4 claws to install the bumper cover.
- HINT:
- The illustration only shows the LH side of the vehicle. The remaining claws are on the RH side.
Install the 8 screws and 4 clips.
Install the retainer.
- HINT:
- Use the same procedure for the RH and LH sides.
Position the groove on the pin hold clip vertically and insert the clip to install it.
- NOTICE:
- Make sure that the groove on the pin hold clip is positioned vertically.
- HINT:
- Use the same procedure for the RH and LH sides.
| 4. INSTALL FRONT FENDER FRONT SPLASH SHIELD LH |
Install the splash shield with the nut, bolt and screw.
| 5. INSTALL FRONT FENDER FRONT SPLASH SHIELD RH |
- HINT:
- Use the same procedure described for the LH side.
| 6. INSTALL RADIATOR GRILLE PROTECTOR |
Install the 2 radiator grille protectors.
| 7. INSTALL HOOD CENTER CUSHION |
Install the hood cushion.
| 8. INSTALL RADIATOR SUPPORT OPENING COVER |
Install the radiator support opening cover with the 9 clips.
