Theft Deterrent System Ecu Power Source Circuit

Securities. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
Theft Deterrent. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

INSPECT FUSE (ECU-B)

CHECK WIRE HARNESS (THEFT WARNING ECU - BATTERY AND BODY GROUND)

THEFT DETERRENT SYSTEM - ECU Power Source Circuit


DESCRIPTION

This circuit provides power to operate the theft warning ECU.

WIRING DIAGRAM


Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Theft Deterrent.Theft Deterrent System.Theft Deterrent System Ecu Power Source Circuit


INSPECTION PROCEDURE

1.INSPECT FUSE (ECU-B)

  1. Remove the ECU-B fuse from the engine room No. 2 relay block.

  1. Measure the resistance of the fuse.

    Standard resistance:
    Below 1 Ω


NG
REPLACE FUSE
OK


2.CHECK WIRE HARNESS (THEFT WARNING ECU - BATTERY AND BODY GROUND)
Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Theft Deterrent.Theft Deterrent System.Theft Deterrent System Ecu Power Source Circuit

  1. Disconnect the E83 ECU connector.

  1. Measure the resistance and voltage of the wire harness side connector.

    Standard resistance:
    Tester Connection
    		Specified Condition
    E83-16 (E) - Body ground
    		Below 1 Ω
    Standard voltage:
    Tester Connection
    		Specified Condition
    E83-11(+B1) - Body ground
    		10 to 14 V


NG
REPAIR OR REPLACE HARNESS AND CONNECTOR
OK

REPLACE THEFT WARNING ECU