Theft Deterrent System How To Proceed With Troubleshooting

Securities. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
Theft Deterrent. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. VEHICLE BROUGHT TO WORKSHOP

  2. INSPECT BATTERY VOLTAGE

  3. CHECK FOR DTC*

  4. PROBLEM SYMPTOMS TABLE

  5. OVERALL ANALYSIS AND TROUBLESHOOTING*

  6. ADJUST, REPAIR OR REPLACE

  7. CONFIRMATION TEST

Theft Deterrent System -- How To Proceed With Troubleshooting


HINT:
  1. Use these procedures to troubleshoot the theft deterrent system.
  2. *: Use the intelligent tester.


1.VEHICLE BROUGHT TO WORKSHOP

    NEXT


    2.INSPECT BATTERY VOLTAGE
      Standard voltage:
      11 to 14 V
      If the voltage is below 11 V, recharge or replace the battery before proceeding.

    NEXT


    3.CHECK FOR DTC*

    1. Check for DTCs and note any codes that are output (RAV4_ACA30 RM000001TV3001X.html).

    2. Clear the DTC.

    3. Recheck for DTCs. Based on the DTC output above, try to force output of the same DTC by simulating the symptoms indicated by the DTC.

      Result:
      Result
      		Proceed to
      DTC output does not reoccur
      		A
      DTC output reoccurs
      		B



    		B.
    Go to step 6
    A


    4.PROBLEM SYMPTOMS TABLE
      Result:
      Result
      		Proceed to
      Fault is not listed in problem symptoms table
      		A
      Fault is listed in problem symptoms table
      		B


    		B.
    Go to step 6
    A


    5.OVERALL ANALYSIS AND TROUBLESHOOTING*

    1. Operation check (RAV4_ACA30 RM000001TV4001X.html)

    2. Data List / Active Test (RAV4_ACA30 RM000001TV6001X.html)

    3. Terminals of ECU (RAV4_ACA30 RM000001TUT001X.html)

    4. Inspection (RAV4_ACA30 RM0000020LO001X.html)


    NEXT


    6.ADJUST, REPAIR OR REPLACE

      NEXT


      7.CONFIRMATION TEST

        NEXT

        END