Restraints. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
Supplemental Restraint System. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
Front Airbag Sensor -- Installation |
- CAUTION:
- Be sure to read the precautionary notices concerning the SRS airbag system before servicing it (RAV4_ACA30 RM000000KT106QX.html ).
| 1. INSTALL FRONT AIRBAG SENSOR LH |
 |
Install the sensor with the bolt.
- Torque:
- 9.0 N*m{92 kgf*cm, 80 in.*lbf}
- NOTICE:
- If the airbag sensor has been dropped, or there are any cracks, dents or other defects in the case or connector, replace it with a new one.
- When installing the airbag sensor, make sure that the SRS wiring does not interfere with other parts and is not pinched between other parts.
Check that there is no free play in the installation parts of the sensor.
Connect the sensor connector.
| 2. INSTALL FRONT AIRBAG SENSOR RH |
 |
Install the sensor with the bolt.
- Torque:
- 9.0 N*m{92 kgf*cm, 80 in.*lbf}
- NOTICE:
- If the airbag sensor has been dropped, or there are any cracks, dents or other defects in the case or connector, replace it with a new one.
- When installing the airbag sensor, make sure that the SRS wiring does not interfere with other parts and is not pinched between other parts.
Check that there is no free play in the installation parts of the sensor.
Connect the sensor connector.
| 3. INSTALL RADIATOR SUPPORT OPENING COVER |
| 4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 5. CHECK SRS WARNING LIGHT |
Check the SRS warning light (RAV4_ACA30 RM000000XFA03UX.html).