Brake Master Cylinder (For Lhd) On-Vehicle Inspection

Brake. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
Brake. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. CHECK BRAKE FLUID LEVEL WARNING SWITCH

Brake Master Cylinder (For Lhd) -- On-Vehicle Inspection



1. CHECK BRAKE FLUID LEVEL WARNING SWITCH

  1. Remove the reservoir filler cap and strainer.

  1. Disconnect the brake fluid level warning switch connector.



    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Brake.Brake System.Brake Master Cylinder (For Lhd) On-Vehicle Inspection

  1. Measure the resistance of the switch.

    HINT:
    There is a float inside the reservoir. Its position can be changed by increasing or decreasing the brake fluid level.
    Standard resistance:
    Tester Connection
    		Condition
    		Specified Condition
    1 - 2
    		Float up (Switch OFF)
    		10 kΩ or higher
    1 - 2
    		Float down (Switch ON)
    		Below 1 Ω
    If the value is not as specified, replace the brake master cylinder reservoir sub-assembly.

  1. Add brake fluid to the MAX level.