REMOVE LOWER INSTRUMENT PANEL FINISH PANEL (w/o Knee Airbag)
DISCONNECT CLUTCH START SWITCH CONNECTOR (w/ Entry and Start System)
DISCONNECT CLUTCH SWITCH CONNECTOR (w/ Cruise Control System)
Clutch Pedal (For Lhd) -- Removal |
| 1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY |
Remove the 2 screws.
 |
Detach the 3 claws and remove the cover.
| 2. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY (w/ Knee Airbag) |
 |
Remove the 4 bolts and driver side knee airbag.
Disconnect the connector.
- NOTICE:
- When handling the airbag connector, take care not to damage the airbag wire harness.
| 3. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL (w/o Knee Airbag) |
 |
Remove the 2 screws.
Using a screwdriver, detach the 8 claws and remove the lower instrument panel finish panel.
- HINT:
- Tape the screwdriver tip before use.
| 4. REMOVE UPPER INSTRUMENT PANEL |
Remove the upper instrument panel (RAV4_ACA30 RM000001RHD00JX.html).
| 5. DISCONNECT CLUTCH START SWITCH CONNECTOR (w/ Entry and Start System) |
Disconnect the clutch start switch connector.
Remove the nut and clutch start switch from the clutch pedal support.
| 6. DISCONNECT CLUTCH SWITCH CONNECTOR (w/ Cruise Control System) |
Disconnect the clutch switch connector.
Remove the nut and clutch switch from the clutch pedal support.
| 7. REMOVE PUSH ROD CLEVIS PIN |
 |
Remove the clip and pin.
| 8. REMOVE CLUTCH PEDAL ASSEMBLY |
 |
Remove the bolt, 2 nuts and clutch pedal.