Automatic Transaxle Assembly Installation
INSPECT TORQUE CONVERTER CLUTCH ASSEMBLY
INSTALL TORQUE CONVERTER CLUTCH ASSEMBLY
INSTALL NO. 1 TRANSMISSION CONTROL CABLE BRACKET
INSTALL TRANSMISSION OIL FILLER TUBE SUB-ASSEMBLY
INSTALL AUTOMATIC TRANSAXLE ASSEMBLY
INSTALL ENGINE MOUNTING BRACKET LH
INSTALL ENGINE MOUNTING BRACKET FR
INSTALL ENGINE MOUNTING BRACKET RR
INSTALL TRANSMISSION OIL COOLER HOSES AND TUBE
CONNECT WIRE HARNESS
INSTALL STARTER ASSEMBLY
INSTALL ENGINE ASSEMBLY WITH TRANSAXLE
ADD AUTOMATIC TRANSAXLE FLUID
INSPECT AUTOMATIC TRANSAXLE FLUID
PERFORM RESET MEMORY
Automatic Transaxle Assembly -- Installation |
1. INSPECT TORQUE CONVERTER CLUTCH ASSEMBLY |
Inspect the torque converter (RAV4_ACA30 RM000001GS000XX.html).
2. INSTALL TORQUE CONVERTER CLUTCH ASSEMBLY |
Install the torque converter clutch to the automatic transaxle.
Using a vernier caliper, measure dimension A between the transaxle and the end surface of the drive plate.
Using a vernier caliper and straightedge, measure the dimension B shown in the illustration and check that B is greater than A.
- Standard dimension:
- A + 1.0 mm (0.039 in.) or more
3. INSTALL NO. 1 TRANSMISSION CONTROL CABLE BRACKET |
Install the cable bracket with the 2 bolts.
- Torque:
- 12 N*m{122 kgf*cm, 9 ft.*lbf}
4. INSTALL TRANSMISSION OIL FILLER TUBE SUB-ASSEMBLY |
Install the filler tube with the bolt.
- Torque:
- 5.5 N*m{56 kgf*cm, 49 in.*lbf}
Install the ATF dipstick.
5. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY |
Install the automatic transaxle with the 5 upper side mounting bolts to the engine.
- Torque:
- 64 N*m{653 kgf*cm, 47 ft.*lbf} for bolt A
- 46 N*m{469 kgf*cm, 34 ft.*lbf} for bolt B
Install the 4 lower side mounting bolts.
- Torque:
- 37 N*m{377 kgf*cm, 27 ft.*lbf}
Install the 6 torque converter clutch mounting bolts.
- Torque:
- 41 N*m{418 kgf*cm, 30 ft.*lbf}
- HINT:
- First install the green colored bolt and then the 5 bolts.
Install the flywheel housing under cover.
6. INSTALL ENGINE MOUNTING BRACKET LH |
Install the mounting bracket with the 3 bolts.
- Torque:
- 64 N*m{653 kgf*cm, 47 ft.*lbf}
7. INSTALL ENGINE MOUNTING BRACKET FR |
Install the mounting bracket with the 3 bolts.
- Torque:
- 64 N*m{657 kgf*cm, 47 ft.*lbf}
8. INSTALL ENGINE MOUNTING BRACKET RR |
Install the mounting bracket with the 3 bolts.
- Torque:
- 45 N*m{459 kgf*cm, 33 ft.*lbf}
9. INSTALL TRANSMISSION OIL COOLER HOSES AND TUBE |
Install the transmission oil cooler hoses and tube (RAV4_ACA30 RM0000024P800JX.html).
Connect the wire harness clamps.
Connect the speed sensor connectors.
Connect the transaxle wire connector.
Connect the park/neutral position switch connector.
11. INSTALL STARTER ASSEMBLY |
Install the starter with the 2 bolts.
- Torque:
- 37 N*m{377 kgf*cm, 27 ft.*lbf}
Connect the starter wire with the nut.
- Torque:
- 13 N*m{133 kgf*cm, 10 ft.*lbf}
Connect the starter connector.
Install the terminal nut and cover the nut with the cap.
- Torque:
- 9.8 N*m{100 kgf*cm, 7 in.*lbf}
12. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE |
Install the engine with transaxle (RAV4_ACA30 RM000001BC100OX.html).
13. ADD AUTOMATIC TRANSAXLE FLUID |
- Fluid type:
- Toyota Genuine ATF WS
14. INSPECT AUTOMATIC TRANSAXLE FLUID |
Inspect the automatic transaxle fluid (RAV4_ACA30 RM0000022UI00GX.html).
Perform the RESET MEMORY procedures (A/T initialization) (RAV4_ACA30 RM000000W7F0AMX.html).