Dtc B2281 P Signal Malfunction

Engine. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
2Az-Fe Starting. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

CHECK HARNESS AND CONNECTOR (MAIN BODY ECU - SHIFT LOCK CONTROL ECU)

CHECK SHIFT LOCK CONTROL ECU

DTC B2281 "P" Signal Malfunction


DESCRIPTION

DTC B2281 is stored when the circuit between the main body ECU and shift lock control ECU is abnormal.

DTC Code.
DTC Detection Condition
Trouble Area
B2281
Communication or the communication line between the main body ECU and shift lock control ECU is abnormal.
  1. Main body ECU
  2. Shift lock control ECU
  3. Harness or connector

WIRING DIAGRAM


Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.2Az-Fe Starting.Starting System (W/ Entry And Start System). Dtc B2281 P Signal Malfunction


INSPECTION PROCEDURE

1.CHECK HARNESS AND CONNECTOR (MAIN BODY ECU - SHIFT LOCK CONTROL ECU)


    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.2Az-Fe Starting.Starting System (W/ Entry And Start System). Dtc B2281 P Signal Malfunction

  1. Disconnect the E18 main body ECU connector.

  1. Disconnect the E44 ECU connector.

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    E18-15 (P) - E44-7 (P2)
    		Always
    		Below 1 Ω
    E18-15 (P) or E44-7 (P2) - Body ground
    		Always
    		10 kΩ or higher


NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK


2.CHECK SHIFT LOCK CONTROL ECU

  1. Temporarily replace the shift lock control ECU with a new or normally functioning one.

  1. Check that the engine starts normally.

    OK:
    Engine starts normally.


NG
REPLACE MAIN BODY ECU (INSTRUMENT PANEL JUNCTION BLOCK)
OK

END (SHIFT LOCK CONTROL ECU IS DEFECTIVE)