Engine Switch (W/ Entry And Start System) Inspection

Engine. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
1Az-Fe Starting. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. INSPECT ENGINE SWITCH

Engine Switch (W/ Entry And Start System) -- Inspection



1. INSPECT ENGINE SWITCH


Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.1Az-Fe Starting.Starting System (W/ Entry And Start System).Engine Switch (W/ Entry And Start System) Inspection

  1. Measure the resistance of the switch.

    Standard resistance:
    Tester Connection
    		Switch Position
    		Specified Condition
    7 (SS1) - 5 (GND)
    		Not pushed
    		10 kΩ or higher
    2 (SS2) - 5 (GND)
    		Not pushed
    		10 kΩ or higher
    7 (SS1) - 5 (GND)
    		Pushed
    		15 Ω
    2 (SS2) - 5 (GND)
    		Pushed
    		15 Ω
    If the result is not as specified, replace the engine switch.


  1. Apply battery voltage between the terminals of the switch, and check the illumination condition of the switch.

    HINT:
    1. If the positive (+) lead and the negative (-) lead are incorrectly connected, the engine switch indicator light will not illuminate.
    2. If the voltage is too low, the indicator light will not illuminate.
    OK:
    Measurement Condition
    		Specified Condition
    Battery positive (+) → Terminal 11 (SWIL)
    Battery negative (-) → Terminal 4 (COM) or 5 (GND)
    		Illuminates
    Battery positive (+) → Terminal 12 (INDS)
    Battery negative (-) → Terminal 4 (COM) or 5 (GND)
    		Illuminates
    Battery positive (+) → Terminal 13 (INDW)
    Battery negative (-) → Terminal 4 (COM) or 5 (GND)
    		Illuminates


    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.1Az-Fe Starting.Starting System (W/ Entry And Start System).Engine Switch (W/ Entry And Start System) Inspection

    If the result is not as specified, replace the engine switch.