Engine. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
1Az-Fe Starting. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
Starter -- Removal |
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
2. DISCONNECT CABLE FROM POSITIVE BATTERY TERMINAL |
3. REMOVE BATTERY CLAMP |
Remove the bolt and loosen the nut.
![]() |
Detach the 2 wire harness clamps.
Detach the hook of the battery clamp from the battery bracket front, and then remove the battery clamp.
4. REMOVE BATTERY INSULATOR |
5. REMOVE BATTERY |
6. REMOVE FRONT BATTERY BRACKET |
Detach the 2 wire harness clamps.
![]() |
Remove the 4 bolts and bracket front.
7. REMOVE BATTERY BRACKET REINFORCEMENT |
![]() |
Remove the 2 bolts and reinforcement bracket.
8. REMOVE STARTER ASSEMBLY |
Disconnect the starter connector.
![]() |
Open the terminal cap, remove the nut and disconnect the starter wire.
Remove the 2 bolts and starter.
![]() |