Engine. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
3Zr-Fae Cooling. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
Cooling Fan Relay -- On-Vehicle Inspection |
| 1. REMOVE ENGINE ROOM NO. 2 RELAY BLOCK COVER |
| 2. INSPECT NO. 1 COOLING FAN RELAY (FAN NO. 1) |
 |
Remove the relay from the engine room No. 2 relay block.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Condition Specified Condition 3 - 5 Battery voltage is not applied to terminals 1 and 2 10 kΩ or higher 3 - 5 Battery voltage is applied to terminals 1 and 2 Below 1 Ω
Install the relay.
| 3. INSPECT NO. 2 COOLING FAN RELAY (FAN NO. 2) |
 |
Remove the relay from the engine room No. 2 relay block.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Condition Specified Condition 3 - 4 Battery voltage is not applied to terminals 1 and 2 Below 1 Ω 3 - 5 Battery voltage is not applied to terminals 1 and 2 10 kΩ or higher 3 - 4 Battery voltage is applied to terminals 1 and 2 10 kΩ or higher 3 - 5 Battery voltage is applied to terminals 1 and 2 Below 1 Ω
- If the result is not as specified, replace the No. 2 cooling fan relay.
Install the relay.
| 4. INSPECT NO. 3 COOLING FAN RELAY (FAN NO. 3) |
|
Remove the relay from the engine room No. 2 relay block.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Condition Specified Condition 3 - 5 Battery voltage is not applied to terminals 1 and 2 10 kΩ or higher 3 - 5 Battery voltage is applied to terminals 1 and 2 Below 1 Ω
Install the relay.
| 5. INSTALL ENGINE ROOM NO. 2 RELAY BLOCK COVER |