Lexus IS250 IS220d GSE20 ALE20 4GR-FSE EMISSION CONTROL
VACUUM SWITCHING VALVE (for EVAP) - REMOVAL
| 1. REMOVE V-BANK COVER SUB-ASSEMBLY |
Raise the V-bank cover to disengage the clip on the rear of the cover. Raise the cover again to disengage the 2 clips on the front of the cover and remove the cover.
- NOTICE:
- Attempting to disengage both front and rear clips at the same time may cause the cover to break.
| 2. REMOVE VACUUM SWITCHING VALVE (for EVAP) |
Disconnect the connector and clamp.
Disconnect the 2 hoses.
Remove the VSV from the intake air connector.
LEXUS IS250, IS220d / GSE20 ALE20