EXHAUST GAS TEMPERATURE SENSOR - REMOVAL

1. REMOVE NO. 1 ENGINE COVER

Remove the No. 1 engine cover.

2. REMOVE COOL AIR INTAKE DUCT SEAL

Remove the 11 clips and intake duct seal.

3. REMOVE ENGINE ROOM SIDE COVER RH

Remove the 2 clips and side cover.

4. REMOVE POWER STEERING ECU ASSEMBLY

5. REMOVE BATTERY TRAY

6. REMOVE FRONT EXHAUST PIPE ASSEMBLY

Remove the 2 bolts and 2 compression springs.

Remove the 2 bolts, 2 compression springs, front exhaust pipe assembly and 2 gaskets.

7. REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY

Disconnect the 2 exhaust gas temperature sensor connectors.

Remove the 2 bolts and nut from the No. 1 manifold stay.

Remove the 2 bolts, nut and No. 2 manifold stay.

Using pliers, slide the clip to disconnect the No. 1 and No. 2 vacuum transmitting hose.

Remove the 3 nuts.

Remove the manifold converter sub-assembly and turbine outlet elbow gasket.

Remove the No. 1 manifold stay.

8. REMOVE EXHAUST GAS TEMPERATURE SENSOR (UPPER)

Remove the 3 nuts.

Using SST, remove the exhaust gas temperature sensor (upper) from the manifold converter.

9. REMOVE EXHAUST GAS TEMPERATURE SENSOR (LOWER)

Remove the 2 nuts.

Using SST, remove the exhaust gas temperature sensor (lower) nut from the manifold converter.

LEXUS IS250, IS220d / GSE20 ALE20

Exhaust Gas Temperature Sensor - Removal