Ignition Relay No. 1 On-Vehicle Inspection

Engine. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
2Gr-Fe Engine Control System. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE IG1 RELAY

  3. INSPECT IG1 RELAY

  4. INSTALL IG1 RELAY

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Ignition Relay No. 1 -- On-Vehicle Inspection



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


2. REMOVE IG1 RELAY

  1. Remove the IG1 relay from the instrument panel junction block.



3. INSPECT IG1 RELAY


    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.2Gr-Fe Engine Control System.Sfi System.Ignition Relay No. 1 On-Vehicle Inspection

  1. Measure the resistance of the IG1 relay.

    Standard resistance:
    Tester Connection
    		Specified Condition
    3 - 5
    		10 kΩ or higher
    3 - 5
    		Below 1 Ω
    (when battery voltage is applied to terminals 1 and 2)
    If the result is not as specified, replace the relay.


4. INSTALL IG1 RELAY


5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL