Back Door Outside Garnish (W/O Tire Carrier) Reassembly


  1. INSTALL BACK DOOR OUTSIDE GARNISH PROTECTOR (for Upper Side)

  2. INSTALL BACK DOOR OUTSIDE GARNISH PROTECTOR (for Lower Side)

  3. INSTALL BACK DOOR ELECTRICAL KEY SWITCH (w/ Entry and Start System)

  4. INSTALL NO. 1 BACK DOOR GARNISH RETAINER

  5. INSTALL LICENSE PLATE LIGHT ASSEMBLY

  6. INSTALL LICENSE PLATE LIGHT CORD (w/o Entry and Start System)

Back Door Outside Garnish (W/O Tire Carrier) -- Reassembly



1. INSTALL BACK DOOR OUTSIDE GARNISH PROTECTOR (for Upper Side)
HINT:
When installing the back door outside garnish protector, heat the No. 2 back door outside garnish surface using a heat light.
Standard:
Item
Temperature
No. 2 Back Door Outside Garnish
20 to 30°C (68 to 86°F)
NOTICE:
Do not heat the back door outside garnish excessively.

  1. Clean the No. 2 back door outside garnish surface.

    1. Using a heat light, heat the No. 2 back door outside garnish surface

    2. Remove the double-sided tape from the No. 2 back door outside garnish.

    3. Wipe off any tape adhesive residue with cleaner.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Exterior Panels Trim.Front Bumper.Back Door Outside Garnish (W/O Tire Carrier) Reassembly

  1. Install a new back door outside garnish protector.

    1. Using a heat light, heat the No. 2 back door outside garnish.

    2. Remove the peeling paper from the face of the back door outside garnish protector.

      HINT:
      After removing the peeling paper, keep the exposed adhesive free from foreign matter.

    3. Install the back door outside garnish protector as shown in the illustration.

      HINT:
      Press the back door outside garnish protector firmly to install it.
      Text in Illustration
      *1
      		Back Door Outside Garnish Protector


2. INSTALL BACK DOOR OUTSIDE GARNISH PROTECTOR (for Lower Side)
HINT:
When installing the back door outside garnish protector, heat the back door outside garnish sub-assembly surface using a heat light.
Standard:
Item
Temperature
Back Door Outside Garnish Sub-assembly
20 to 30°C (68 to 86°F)
NOTICE:
Do not heat the back door outside garnish excessively.

  1. Clean the back door outside garnish sub-assembly surface.

    1. Using a heat light, heat the back door outside garnish sub-assembly surface

    2. Remove the double-sided tape from the back door outside garnish sub-assembly.

    3. Wipe off any tape adhesive residue with cleaner.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Exterior Panels Trim.Front Bumper.Back Door Outside Garnish (W/O Tire Carrier) Reassembly

  1. Install a new back door outside garnish protector.

    1. Using a heat light, heat the back door outside garnish sub-assembly.

    2. Remove the peeling paper from the face of the back door outside garnish protector.

      HINT:
      After removing the peeling paper, keep the exposed adhesive free from foreign matter.

    3. Install the back door outside garnish protector as shown in the illustration.

      HINT:
      Press the back door outside garnish protector firmly to install it.
      Text in Illustration
      *1
      		Back Door Outside Garnish Protector


3. INSTALL BACK DOOR ELECTRICAL KEY SWITCH (w/ Entry and Start System)

  1. Attach the 2 guides to install the back door electrical key switch.

  1. Install the 2 screws.

  1. Attach the clamp.



4. INSTALL NO. 1 BACK DOOR GARNISH RETAINER

  1. Install the No. 1 back door garnish retainer with the 3 screws.



5. INSTALL LICENSE PLATE LIGHT ASSEMBLY

  1. Attach the 2 guides to install the license plate light assembly.

  1. Install the 4 screws.



6. INSTALL LICENSE PLATE LIGHT CORD (w/o Entry and Start System)

  1. Connect the connector to install the license plate light cord.