Rear Spoiler (W/ Tire Carrier) Removal


  1. REMOVE CENTER BACK DOOR GARNISH

  2. REMOVE BACK DOOR SIDE GARNISH LH

  3. REMOVE BACK DOOR SIDE GARNISH RH

  4. REMOVE REAR SPOILER COVER RH

  5. REMOVE REAR SPOILER SUB-ASSEMBLY

  6. REMOVE NO. 2 BACK DOOR STIFFENER

Rear Spoiler (W/ Tire Carrier) -- Removal



1. REMOVE CENTER BACK DOOR GARNISH


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Detach the 4 clips and remove the back door center garnish.



2. REMOVE BACK DOOR SIDE GARNISH LH


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Detach the 2 clips and claw and remove the back door side garnish.



3. REMOVE BACK DOOR SIDE GARNISH RH


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Detach the 2 clips and claw and remove the back door side garnish.



4. REMOVE REAR SPOILER COVER RH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Exterior Panels Trim.Front Bumper.Rear Spoiler (W/ Tire Carrier) Removal

  1. Put protective tape around the rear spoiler cover.

  1. Using a screwdriver, detach the 2 clips and remove the rear spoiler cover as shown in the illustration.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration
    *1
    		Protective Tape


5. REMOVE REAR SPOILER SUB-ASSEMBLY


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Disconnect the connector.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 2 grommets and 6 bolts.

  1. Detach the 3 clips and remove the rear spoiler.



6. REMOVE NO. 2 BACK DOOR STIFFENER


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Exterior Panels Trim.Front Bumper.Rear Spoiler (W/ Tire Carrier) Removal
HINT:
Use the same procedure to remove the No. 2 back door stiffener on the other side.

  1. Put protective tape around the No. 2 back door stiffener.

  1. Using a clip remover, detach the 2 claws and remove the No. 2 back door stiffener.

    HINT:
    Tape the clip remover tip before use.
    Text in Illustration
    *1
    		Protective Tape