Stop Light Switch Installation


  1. INSTALL STOP LIGHT SWITCH MOUNTING ADJUSTER

  2. INSTALL STOP LIGHT SWITCH ASSEMBLY

  3. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

Stop Light Switch -- Installation


HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.


1. INSTALL STOP LIGHT SWITCH MOUNTING ADJUSTER

  1. Attach the 2 claws to install a new stop light switch mounting adjuster.



2. INSTALL STOP LIGHT SWITCH ASSEMBLY


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Lighting (Ext).Lighting System.Stop Light Switch Installation

  1. Install the stop light switch assembly to the stop light switch mounting adjuster until the switch body slightly touches the brake pedal.

    NOTICE:
    Do not depress the brake pedal.
    Text in Illustration
    *1
    		Brake Pedal
    *2
    		Stop Light Switch Mounting Adjuster
    *3
    		Stop Light Switch Assembly


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Lighting (Ext).Lighting System.Stop Light Switch Installation

  1. Rotate the stop light switch assembly clockwise so that the clearance is between 1.5 and 2.5 mm (0.0590 and 0.0984 in.) as shown in the illustration.

    Text in Illustration
    *1
    		Shaft
    *2
    		Stop Light Switch Assembly
    *a
    		1.5 to 2.5 mm
    NOTICE:
    Do not depress the brake pedal.

  1. Check the stop light switch assembly clearance.

    Stop light switch assembly clearance:
    1.5 to 2.5 mm (0.0590 to 0.0984 in.)

  1. Connect the connector to the stop light switch assembly.



3. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

  1. for LHD:

    1. Attach the 2 clips and 2 guides to install the No. 1 instrument panel under cover.

    2. Install the screw.

  1. for RHD:

    1. Attach the 3 clips and 2 guides to install the No. 1 instrument panel under cover.

    2. Install the screw.